Results for %E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%89%B9%E3%83%99grace%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EF%BC%B3%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%D0%B5%20%D1%8F%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EB%B9%84%EC%9A%A9superstition%20%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%80%B2%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%C2%A7%EF%BC%98fetch

Step 20: Gather components for sub-sea cable
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
Components: Blue Robotics 4-core Ping Cable (11 metres), 2 x 4.5mm WLP-M06 cable wet link penetrators including nuts, o-rings, and silicone seal, plus 2 x cut shake-proof washers, 1 x rubber strain relief boot , 2 x Micro JST 2-way female connectors....

Sugarcube - a tactile music controller
Instructions from Sugarcube - a tactile music controller
I attached a 2 axis gyroscope and 3 axis accelerometer onto this project so that I could add some interesting control to the device. The 5 degrees of freedom board from Sparkfun outputs data from its gyroscope and accelerometer as analog voltages. I...

Wiring Up the Circuit (Wemos D1)
Instructions from Wi-Fi Controlled Robot Using Blynk App
In the video above I show you how you can assemble the electronics in the robot structure. A power pack made of three 18650 batteries was installed on the back of the robot. It provides 11.1V (3 x 3.7V) to the robot. That's enough to power the 12V DC...

Wiring Up the Circuit (Wemos D1)
Instructions from Wi-Fi Voice Controlled Robot with Google Assistant
In the video above I show you how you can assemble the electronics in the robot structure. A power pack made of three 18650 batteries was installed on the back of the robot. It provides 11.1V (3 x 3.7V) to the robot. That's enough to power the 12V DC...

Create a function to decode the payload
Instructions from 2022 HDP 4 - Climate Resilient Communities
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...

Run a Program
Instructions from Analog Speedometer Using Arduino and IR Sensor
#includeLiquidCrystal lcd(A5,A4,A3,A2,A1,A0);#include const int stepsPerRevolution = 200; // change this to fit the number of steps per revolutionStepper myStepper(stepsPerRevolution, 8, 9, 10, 11);volatile byte REV; unsigned long int rpm,RPM;unsigned...

NODE-RED CONNECTIONS!
Instructions from OBS_IRL_STREAM_DECK
The first thing we need is a basic flow to separate button presses into different outputs. [{"id":"50b49ab2.1e6f64","type":"mqtt in","z":"7805686.aa4fd98","name":"","topic":"button_glove","qos":"0","datatype":"auto","broker":"","x":310,"y":2180,"wires":[["ea9f502f.2dd17"]]},{"id":"ea9f502f.2dd17","type":"json","z":"7805686.aa4fd98","name":"","property":"payload","action":"obj","pretty":false,"x":490,"y":2180,"wires":[["425aef92.aa3da8"]]},{"id":"425aef92.aa3da8","type":"function","z":"7805686.aa4fd98","name":"ButtonSeperator","func":"var...

The NanoStillery™ - Whiskey Distillery
Instructions from The NanoStillery™ - Whiskey Distillery
Arduino Mega Code The code in the main control panel is fairly standard except for the part which sends data down the I2C bus to the Adafruit Feather slave. This code can be found in 'void sendData()' below and involves disassembling complex float numbers...

Run a Program
Instructions from Arduino DC Motor Speed & Direction Control
int x;int y;void setup() { pinMode(2,OUTPUT); pinMode(3,OUTPUT); pinMode(6,OUTPUT); pinMode(A0,INPUT);} void loop() { x=analogRead(A0); y=map(x,0,1023,0,255); analogWrite(6,y); digitalWrite(2,HIGH); digitalWrite(3,HIGH);}

I2C Sensors and debugging
Instructions from Stratux ADSB Receiver and AHRS
I wanted to use a BMP280 I had in my parts bin for altitude measurements. I have used it in the past for a simple weather station and it works great! Turns out, it is even the go to sensor for Stratux, so I went ahead and plugged it in, activated it...

Run a Code
Instructions from AC Voltmeter using Arduino
int m; // initialise variable m float n; //initialise variable n void setup() { pinMode(A0,INPUT); // set pin a0 as input pin Serial.begin(9600);// begin serial communication between Arduino and pc } void loop() { m=analogRead(A0); // read analog values...

Run a Program
Instructions from IoT Digital Thermometer using LM35 and NodeMCU
#include const char* ssid = "*********"; // Your ssid const char* password = "***********"; // Your Password float temp_celsius = 0; float temp_fahrenheit = 0; WiFiServer server(80); void setup() { Serial.begin(115200); pinMode(A0, INPUT); Serial.println();...

NANO-4096
Instructions from NANO-4096
Finally screw the spacer onto the joystick breakout boardSolder the joystick onto the perfboard and connect VCC (5v) and GNDConnect the X pot to A1 (Since the board is rotated X becomes Y)Connect the Y pot to A0Key is not connected

Arduino Game Console - the BlueOkiris Gameduino
Instructions from Arduino Game Console - the BlueOkiris Gameduino
Take the analog stick and solder the appropriate wires to it. Place ground to ground, 5v to 5v, x to A4, and y to A5. Again do not use male ends to the arduino.

Visualizing your data in Ubidots
Instructions from Siemens SIMATIC IOT2000 Series to Ubidots + Arduin
Once you are able to compile the Blink code into the SIMATIC IOT2000 you can continue with the following steps: 1. Copy and paste the code below in your Arduino IDE. Once you have pasted the code be sure assign the unique Ubidots TOKEN where indicated....