Close

19581 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워가격К 쓰리아워레깅스룸realmが쓰리아워쓰리아워레깅스룸강남술집정보better 쓰리아워㎶강남쓰리아워ゲⓝ강남쓰리아워recognition"

  • Part 1 - The PCB

  • Instructions     from NOOBIX IOT
  • What’s up my friends, welcome back. This below is the PCB that I’ve designed for my project. I’ve tried to make it as small as I could so it could fit inside of a basic wall electric box. This project works at 220V so make sure you stay safe and...

  • Part 2 - What we need
  • Instructions     from NOOBIX IOT
  • Let's see all the needed parts and also check the schematic for this project below in order to know where to connect each part. We need the 220V to 12V regulator, the solid-state relay, an ESP32S smd version, some SMD capacitors and resistors, a diode,...

  • Part 3 - PCB Schemati
  • Instructions     from NOOBIX IOT
  • The schematic is quite easy. The basic configuration of the ESP32 chip with pullups to 3.3V for Enable and RST pins. The converter module give us 12V so we connect that in series with the AMS1117 regulators of 5 and 3.3V. The Relay circuit is simple....

  • Part 4 - Assemble the PCB
  • Instructions     from NOOBIX IOT
  • First I solder the voltage converter module. For that add 4 male pins. And on top of those pins we add the converter and we solder it. I also add the input and the output terminals. Then I carefully connect a 220V AC cable at the input. Be careful, and...

  • Part 5 - Website + Database
  • Instructions     from NOOBIX IOT
  • Please check my previous tutorial about IOT with the ESP32 in order to understand more because I won’t go over those steps again. In the video below you learn how to make the website, the database, the internet connection and so on. Follow...

  • Part 6 - Arduino CODE
  • Instructions     from NOOBIX IOT
  • Now download the Arduino Code from below. Read the instructions in the code line by line. First, you have to change your wifi name and password. Then scroll down and in the http.begin function change the website from "electronoobs.com" to the...

  • Part 7 - Full Tutorial Video
  • Instructions     from NOOBIX IOT
  • Now as you can see in the tutorial video, each time I toggle the button on my website, the LED on the NOOBIX board is also turning on and off. But we can also connect it to high voltage. Connect a 220V load at the output. Then we add a cable at the input...

  • BASIC SETUP
  • Instructions     from PORTABLE Space Trash Game Console
  • Setting up a basic breadboard version of the project, which consists of three push buttons connected to one 1K resistor each between VCC and GND, is the first phase or level. When the button is pressed, a value is obtained at the GPIO Pins, which is...

  • LEVEL 2
  • Instructions     from PORTABLE Space Trash Game Console
  • We used a 55 x 35 mm prototype board for Level 2 of this project and added three push buttons to it: two 6 x 6 mm push buttons for up and down, and one 12 x 12 mm push button for fire.Next we added Three 1K Resistor with each push button.The resistor...

  • 3D DESIGN
  • Instructions     from PORTABLE Space Trash Game Console
  • After assembling the Switch PCB and XIAO Expansion board, we model both components in Fusion360 and create a robust enclosure that holds the XIAO, which is connected to a battery and the switch PCB. We incorporated the XIAO Expansion board on top and...

  • ASSEMBLY PROCESS
  • Instructions     from PORTABLE Space Trash Game Console
  • In order to complete the build, we connected the JST connector of the LiPo cell into the expansion board first, and then we placed the LiPo cell into the 3D printed base.Next, we position the switch PCB and expansion board on the expansion board in their...

  • RESULT
  • Instructions     from PORTABLE Space Trash Game Console
  • Here's the result of this small build- a completely functional portable game console, loaded with the classic space trash game from old Nokia phones. The ESP32C3 chip is the reason that this setup functions flawlessly. Although the code is somewhat lengthy,...

  • Hardcoded Settings in main.cpp / Installation
  • Instructions     from PV Energy Management
  • On first the Code Checks if Settings Uploaded as config.json in Spiffs Image, then starts first as Access Point (Captive Portal) to set these Settings if Settings not available at Boot. Other Hand there are Five Settings they are hardcoded: NTP Server...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday