19581 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㉵ 강남쓰리아워rest강남쓰리아워ル쓰리아워가격obs 강남술집정보ㅈ쓰리아워가격¤강남쓰리아워Ｉ─쓰리아워가격minute"

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Screw the wood backer in with some drywall screws, and then hollow out a shallow void for the neodymium magnets to fit into.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Screw two neodymium magnets to the backer wood, making sure to keep them just below the surface of the wall.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
I added some drywall mesh tape just where the magnets were just in case they might cause drywall cracking if the force was strong enough. Then start to spread drywall compound (mud) evenly over the surface pushing it into the cracks.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Spread it smooth so you won't have to do a lot of sanding later, but you may have to sand and do another thin finish coat.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Test it with the HP Touchpad to see if it charges through the thickness of mud. IT DOES!

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
If you walls are textured, you'll need to texture the wall to match. If you have a special texture (other than spray like mine) you might practice on a scrap board as you want this to match seamlessly.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Once you have the texture matched, you'll paint the wall to match. I made sure to sand the lip where the Touchpad rests smooth, almost to the painters tape underneath since I wanted to Touchpad to fit as it it were on my desk.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Now to add some thin metal strips to the back of the HP Touchpad. I just used some black painted metal plates I had and some 3M Double sided tape. Bend the metal to follow the curve of the Touchpad's back.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Add some double-sided tape, butting edges to keep it smooth/flat.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Stick the metal plate to the back, one plate for landscape and one for portrait, since the Touchstone supports charging in either orientation. Since my plates were already painted, I didn't want to cut them so they fit perfectly. This looked fine for...

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Done and working, I can run HP's WebOS, Android ICS Cyanogenmod, and thanks to the Splashtop App I can remote into my Windows or Mac PCs.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Mac OSX and I added a nice screw-less wall plate to the switches below.

windowlicker
Instructions from windowlicker
dont build this. its a pointless hack, and 1 mil spacing is not recommended.

Wearable computer
Instructions from Wearable computer
Disassemble the primary unit of the video glasses, which now resembles a black plastic bar. You should end up with two boards connected by a thin-film ribbon cable, one of which is connected to another board (containing a USB-like plug) connected by...

Wearable computer
Instructions from Wearable computer
The board with the USB-like connector on it will be connected to the colored wires via surface-mount solder on top of vias. This is a really bad thing for the kind of torque you are likely to put on this connector board. So, desolder these wires using...

|<
<
3
4
5
6
7
>
>|