19581 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워가격К 쓰리아워레깅스룸realmが쓰리아워쓰리아워레깅스룸강남술집정보better 쓰리아워㎶강남쓰리아워ゲⓝ강남쓰리아워recognition"

Keyboard with Apple Mouse Scroll Ball
Instructions from Keyboard with Apple Mouse Scroll Ball
Use a dremel to make the hole in the top plate

Keyboard with Apple Mouse Scroll Ball
Instructions from Keyboard with Apple Mouse Scroll Ball
Dremel also removes material on the back side of the plate so that the ball is close to the surface.

Keyboard with Apple Mouse Scroll Ball
Instructions from Keyboard with Apple Mouse Scroll Ball
ot glue or epoxy attach the USB hub to make a permanent foot. (You'll have to add something to the other side as well)

Setting up Linux AVR and ARM toolchains
Instructions from Setting up Linux AVR and ARM toolchains
INSTALLING MINT ON A RELUCTANT TOSHIBA SATELLITE LAPTOPDownloaded the latest Linux Mint 16 with Mate image via torrent from linuxmint.org. Burned to DVD and used it to boot the Toshiba. All seemed to be going well untill the boot finished and I tried...

VisualK-OS (Control Console) [Prototype]
Instructions from VisualK-OS (Control Console) [Prototype]
I doubt anyone will desire to re-build my band's lighting controllers/FX. haha

Halo 4 Helmet ( Size A, B, C )
Instructions from Halo 4 Helmet ( Size A, B, C )
Step 1 test - these instructions are to test layout / intent of hackaday projects.

Halo 4 Helmet ( Size A, B, C )
Instructions from Halo 4 Helmet ( Size A, B, C )
Step 4 test

CUBEX
Instructions from CUBEX
Powering the Motherboard, Camera, and Radio board using a power supply set to 3.3v, upload the code available at: https://github.com/arkorobotics/CUBEX_V1/tree/master/Code

CUBEX
Instructions from CUBEX
Plug in a USB-RTL (or any sdr device) to your computer, tune (using the sdr-sharp) to 434.460Mhz USB and wait for SSDV/RTTY signal.

CUBEX
Instructions from CUBEX
Finally, assemble CUBEX Power Board, LTC3536 section first, connect a power supply (set to 4.2v) to the battery input and measure the LTC3536 (buck-boost) output to assure the output is 3.3v. Then solder on the LTC3105 (solar charger) and solar cells...

Smart Solder reflow oven
Instructions from Smart Solder reflow oven
First thing to do is create simple heater controller. My idea is to use PWM signal what will turn on/of heating element, and because PWM is running more than 1kHz, i can get very fine power control. Here is original circuit:Idea very simple. First i...

FPGA development board
Instructions from FPGA development board
Board schematic is located at https://github.com/OH1TR/oh1tr-fpga-devboardI also have some code writen to this and it will be added soon.

Bench power supply
Instructions from Bench power supply
1) Come up with a simple good idea.2) Add good ideas to it.3) Try to implement it.4) When it fails, start to strip down the design to try to get it to work.5) Strip it down more6) More...7) Rejoyce when something simple works8) Add a few simple things...

Candy Tin PC
Instructions from Candy Tin PC
Find a candy tin large enough to hold all the parts

Candy Tin PC
Instructions from Candy Tin PC
Cut and drill all the holes needed to get plugs and screws situated

|<
<
5
6
7
8
9
>
>|