Close

7335 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워㏃ ㏐addition쓰리아워Ⅶ강남술집정보강남술집정보Ｏ Ч강남술집정보exhibit 강남쓰리아워к강남술집정보㎼Ŋmethod"

  • update_sensor.php
  • Instructions     from Industry 4.0: An economical SAAS MES part 1
  • Note: This page is used when the counter value remains unchanged for more than 2 occurrences (2 cosecutives HTTP posts with the same values of counter).In this situation, the ESP32 program - instead of creating a new line in the database - updates the...

  • CODE
  • Instructions     from DIY Digital Watch Project
  • Here's the code used in this project.#include PCF8563 pcf; #include #include #include #include #define OLED_WIDTH 128 #define OLED_HEIGHT 64 #define OLED_ADDR 0x3C Adafruit_SSD1306 display(OLED_WIDTH, OLED_HEIGHT); void setup() { display.begin(SSD1306_SWITCHCAPVCC,...

  • Part 1 - The PCB

  • Instructions     from NOOBIX IOT
  • What’s up my friends, welcome back. This below is the PCB that I’ve designed for my project. I’ve tried to make it as small as I could so it could fit inside of a basic wall electric box. This project works at 220V so make sure you stay safe and...

  • Part 2 - What we need
  • Instructions     from NOOBIX IOT
  • Let's see all the needed parts and also check the schematic for this project below in order to know where to connect each part. We need the 220V to 12V regulator, the solid-state relay, an ESP32S smd version, some SMD capacitors and resistors, a diode,...

  • Part 5 - Website + Database
  • Instructions     from NOOBIX IOT
  • Please check my previous tutorial about IOT with the ESP32 in order to understand more because I won’t go over those steps again. In the video below you learn how to make the website, the database, the internet connection and so on. Follow...

  • Part 7 - Full Tutorial Video
  • Instructions     from NOOBIX IOT
  • Now as you can see in the tutorial video, each time I toggle the button on my website, the LED on the NOOBIX board is also turning on and off. But we can also connect it to high voltage. Connect a 220V load at the output. Then we add a cable at the input...

  • Hardcoded Settings in main.cpp / Installation
  • Instructions     from PV Energy Management
  • On first the Code Checks if Settings Uploaded as config.json in Spiffs Image, then starts first as Access Point (Captive Portal) to set these Settings if Settings not available at Boot. Other Hand there are Five Settings they are hardcoded: NTP Server...

  • Find and replace
  • Instructions     from Industry 4.0: An economical SAAS MES part 2
  • SearchReplace withNumber of expected changes/my_custom_url/PRIVATE/db_config.phpThe real URL of your db_config.php file10dbs12345678The name of your database2Europe/ParisYour TimeZone. The list of supported time zones can be found at:https://www.php.net/manual/en/timezones.php1...

  • Modify the Shell
  • Instructions     from GPiA
  • Now affter testing everything, try fitting the screnn into the shell, if nessesary remove some plastic with an exacto knife. If it fits try around with the other parts:The Speaker should fit if you're using an original GBA one, or a little cut on one...

  • PCB Design
  • Instructions     from Power Monitoring for your Mobile Home
  • The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used.  The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday