Close

3734 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워㏃ ㏐addition쓰리아워Ⅶ강남술집정보강남술집정보Ｏ Ч강남술집정보exhibit 강남쓰리아워к강남술집정보㎼Ŋmethod"

  • IRK! Infrared Remote USB Keyboard
  • Instructions     from IRK! Infrared Remote USB Keyboard
  • Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

  • Low Cost CO2 Laser Build
  • Instructions     from Low Cost CO2 Laser Build
  • PVC Cooling Jacket for CO2 Laser0PVC Cooling Jacket for CO2 LaserThe adventure begins while I was walking around the local home depot looking at ideas on how to build the laser. I was sort of making it up as I went. Mapping things out in my mind. I wanted...

  • 650nm 5mw Laser Build
  • Instructions     from 650nm 5mw Laser Build
  • After some scrounging around I found a cheap axis laser housing with diode and driver board still intact! For me, this is a mirracle as most of the time, I usually disassemble things when I first get them.After I scrounged up the rest of the parts I...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 1 - Assemble the fittingsLet's get the easy part out of the way first. For this step, you'll need your bag of fittings, the valves, the pressure gauge, a roll of teflon tape, and a crescent wrench.Assembling brass fittings is pretty easy, but...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 2: Prepare the pressure cookerNow for the fun part. In this step, you'll be drilling a hole in your nice shiny new pressure cooker. I know, it's tough, but it's for a good cause.You're going to need: A metalworking drill pressThe pressure cookerA...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 3: Install the bulkhead fittingThis step is very easy, but it's also your biggest potential leak. Don't worry about that too much now; leak hunting is great sport in the world of vacuum chambers, and there's plenty of time for it later. Find your...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 4: Copper tubing and compression fittings It's finally time to put the pieces together.Cut two lengths of copper tubing. One length connects the fittings assembly to the pressure cooker. The other, longer, length connects the fittings to the vacuum...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 5: Final assembly Now is the time for that pressure cooker lid that you set aside earlier.The gasket that's in the lid of the Miro pressure cooker is very easy to remove. Just give it a gentle tug and work your way around the lid. It should come...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 6: Vacuum time Well, we're finally here. It's time to turn on the vacuum pump, and run for cover. Maybe.Before we actually flip the switch, a few words of caution from our sponsor.First, be sure to read the instructions that came with your pump....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday