Close

6761 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

  • Smile Station
  • Instructions     from Smile Station
  • From the last step you should have seen how to and where every thing is going. So lets get started with the power... I used a PC power supply I had.   ( 500 Watt ) I cut out the + 12 v  and rigged the power supply to come on when power is applied. ...

  • Sci-fi grade Home Automation
  • Instructions     from Sci-fi grade Home Automation
  • For each machine where you want speech recognition:Run the JarvisListBox app, and set it to run at start-up.If you feel comfortable with code, you can edit its commands in the ListBox constructor to make it more appropriate for your setup.Running microphones...

  • Sci-fi grade Home Automation
  • Instructions     from Sci-fi grade Home Automation
  • For the outlet power detectors:Cut the connectors off of your two wall warts and solder the grounds together (and to the ground on their Arduino)Solder the +5v wire of one wall wart to the +5v plug on the Spark core, and the other to digital input 3...

  • ZX7r Ignition connector fix
  • Instructions     from ZX7r Ignition connector fix
  • Determine if you really need to rework your electrical system. I have had this problem on all of my ZX7r motorcycles, and have repaired them all. The main problem is the machine not starting because these connections supply power to the rest of the motorcycle....

  • Arcade Control Panel
  • Instructions     from Arcade Control Panel
  • Step 3 - Hit up your local hardware store and pick up all of the lumber and hardware you will need.  Or if you are like me, dig through your salvage and scrap for most of it, then pick up what you don't already have.

  • Arcade Control Panel
  • Instructions     from Arcade Control Panel
  • Step 4 - Now things get interesting.  I happen to have access to both large printing equipment and a CNC mill.  I was able to print my design at full scale repeatedly till I decided I liked it, then transfer the design into the CNC software...

  • GLaDOs Replica for RORI
  • Instructions     from GLaDOs Replica for RORI
  • Assemble itFor the head :Put the RGB LED.Then, fix the camera:And the two servomotors:Then, the high part of the body:The fix the down part and the base (One motor is missing because I don't receive it):Put the sticker:Get some wires:Build the first...

  • Authentic Blueprints
  • Instructions     from Authentic Blueprints
  • Clean Up the ImageOpen up the image in your editor of choice. We're going to have to make some changes.1. Turn the saturation all the way down to get a black and white image.2. Adjust the levels for maximum contrast.3. Invert the colors. What you want...

  • Peril-Sensitive Sunglasses
  • Instructions     from Peril-Sensitive Sunglasses
  • In my code, Digital 3 is connected to a momentary button connected to GND.  (It is used to modify the code's behaviour - at startup you can disable or enable various sensors with button presses.)

  • Peril-Sensitive Sunglasses
  • Instructions     from Peril-Sensitive Sunglasses
  • Analog 3 is the GSR (Galvanic Skin Response) sensor.The two contacts are conductive metal.  Normally two fingertips are used to keep touch with the contacts.I placed two copper contacts like so, in spots my index and middle fingertips naturally...

  • Peril-Sensitive Sunglasses
  • Instructions     from Peril-Sensitive Sunglasses
  • Analog 4 is the Temperature sensor input.The TMP36 outputs an analog voltage that represents the temperature.A simple formula gives the temperature based on voltage:float celsius = ((voltage * 1000) - 500) / 10;

  • Wireless Flux Capacitor
  • Instructions     from Wireless Flux Capacitor
  • 1. The first thing I did after coming up with the idea is to find a way to control 3 sets of 8 leds on each with a minimum amount of wires.  I found an article that talked about shift registers and went ahead and ordered a few to try them out. following...

  • Wireless Flux Capacitor
  • Instructions     from Wireless Flux Capacitor
  • 3. I picked up some lexan from home depot and designed the front panel of the flux capacitor. I cut it out on my home made cnc machine and painted the back black. I also cut out a bezel from mdf, sanded and painted grey. 
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday