Close

6761 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Part 2 - What we need
  • Instructions     from NOOBIX IOT
  • Let's see all the needed parts and also check the schematic for this project below in order to know where to connect each part. We need the 220V to 12V regulator, the solid-state relay, an ESP32S smd version, some SMD capacitors and resistors, a diode,...

  • Part 3 - PCB Schemati
  • Instructions     from NOOBIX IOT
  • The schematic is quite easy. The basic configuration of the ESP32 chip with pullups to 3.3V for Enable and RST pins. The converter module give us 12V so we connect that in series with the AMS1117 regulators of 5 and 3.3V. The Relay circuit is simple....

  • Part 4 - Assemble the PCB
  • Instructions     from NOOBIX IOT
  • First I solder the voltage converter module. For that add 4 male pins. And on top of those pins we add the converter and we solder it. I also add the input and the output terminals. Then I carefully connect a 220V AC cable at the input. Be careful, and...

  • Part 5 - Website + Database
  • Instructions     from NOOBIX IOT
  • Please check my previous tutorial about IOT with the ESP32 in order to understand more because I won’t go over those steps again. In the video below you learn how to make the website, the database, the internet connection and so on. Follow...

  • 3D DESIGN
  • Instructions     from PORTABLE Space Trash Game Console
  • After assembling the Switch PCB and XIAO Expansion board, we model both components in Fusion360 and create a robust enclosure that holds the XIAO, which is connected to a battery and the switch PCB. We incorporated the XIAO Expansion board on top and...

  • ASSEMBLY PROCESS
  • Instructions     from PORTABLE Space Trash Game Console
  • In order to complete the build, we connected the JST connector of the LiPo cell into the expansion board first, and then we placed the LiPo cell into the 3D printed base.Next, we position the switch PCB and expansion board on the expansion board in their...

  • Connect the I2S Amp
  • Instructions     from GPiA
  • Now Connect the I2S Amp VCC to 5V PIN(2/4) GND to any GroundBCK to Pin 12 LRCK to Pin 35DIN to Pin 40

  • Cell Phone App
  • Instructions     from Power Monitoring for your Mobile Home
  • I built a cell phone app to complement this project as I feel that we are entering an age when everyone expects their electronics to seamlessly connect to their phone. A cell phone app offers convenient access to real-time electricity data...

  • Making a PCB
  • Instructions     from Automatic Air Assist for 3018 CNC
  • This is the V1 of the controller, having two outputs. Later I decided to leave only one. While you could opt for point-to-point connections, utilizing a Printed Circuit Board (PCB) offers a more reliable method for assembling the electronics. For those...

  • Making a controller enclosure
  • Instructions     from Automatic Air Assist for 3018 CNC
  • I opted for a double-slot flush-mounted box (orange) as the foundation for my enclosure. One slot accommodates the freewheeling PCB of the controller, while the other is utilized as intended: it houses a socket (black). The enclosure is made up of a...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday