495 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

IOT Soil Conductivity and PH Sensor
Instructions from IOT Soil Conductivity and PH Sensor
NodeMCU open preferences In the Arduino IDE and copy the link below in the field where it says "Additional Boards Manager". This is how we can get the Arduino IDE to recognize the NodeMCU http://arduino.esp8266.com/stable/package_esp8266com_index.json...

Wiring the Circuit
Instructions from The Wireless Tin Can Telephone
Once everything is securely glued in, it’s time for wiring! Use the provided schematic to connect all the jumpers to their appropriate pins. I’ll also provide the pin-outs below: (Note, this is for the Gravity Expansion HAT) Antenna Board: MI -> MISOMO...

Step 1: verify that everything works properly
Instructions from Modular 5-bar robot
NOTE: none of the following steps require a power supply connected to any of the boards, but in case you want to do so, connect the power supply to the board BEFORE plugging it to your PC and opening the port, as this may cause a short circuit on your...

3. Peripherals Setup: TFT Display Control
Instructions from PiCon One
This step describes the TFT display setup for PiCon One. The TFT display I am using is the Adafruit 3.5 480x320 display with product ID 2050. The current pin assignment for this TFT on PiCon One v1.0a is matching the Adafruit 3.5 PiTFT (product ID 2097)....

The Dune Pain Box
Instructions from The Dune Pain Box
Winding the inductors is easier than you might think! I used about 4 feet of 18GA Magnet wire to wind the inductors for this particular power supply. Each inductor has ~30 turns on it for an inductance of about 90uH. If you don't have...

Low cost two wheels drive - hoverboard hack
Instructions from Low cost two wheels drive - hoverboard hack
Project has been done in Amiqual4Home Equipex Creativity Lab - https://amiqual4home.inria.fr/DescriptionPower your robot, chair, couch, with an overboard! Gives anything two wheels drive!Hoverboard are chinese low cost products. Hacking it can give a...

Creating Application and Coding the Arduino
Instructions from LoRaWAN using Dragino Gateway and TheThingsNetwork
The Dragino Kit comes with two Arduino Uno. One mounted with the Lora module and the other mounted with the GPS module along with the LoRa module. For our project, we will be using the one without the GPS module. In this step, we will create an application...

Once you have the board, you will need to upload the software
Instructions from Pedal Powered Circuit Display
In order to do this you will need an FTDI programmer. This one from Amazon works well - https://amzn.to/3DNSsswTo also make things easier, female to female jumper wires will be needed if you don't already have some. If you don't you...

Modify the code to send something more interesting!
Instructions from Cypress PSoC 6 and AWS IoT
Well, we got MQTT working, but now what? We want to send something more interesting than just HELLO. We want to send some actual data. Up to this point, you have been able to use either of the Cypress PSoC 6 dev boards (the CY8CPROTO-062-4343W or the...

Programming the Arduino based GPS Node
Instructions from LoRa GPS Tracker Tutorial | LoRaWAN with Dragino
In this step, we are going to upload the program in our Arduino based node. For that, you need to refer to the GitHub repository for this project from here and follow the steps given below: 1. Head over to the Github repository. There you will see a...

Raspi Newspaper Synthesizer/Reader
Instructions from Raspi Newspaper Synthesizer/Reader
Now we need to add a file that is missing from the tts repositories. Fortunately Google themselves make it available but it needs some modifications to make it work with the Raspi port. You can find the file at https://android.googlesource.com/platform/external/svox/+/9b08cc440f25c4722ca112642be87053fc47f918/pico/tts/com_svox_picottsengine.cpp...

Setting Up the PCB
Instructions from DIY Control any home appliance with the ESP8266
After populating our custom PCB with the required components, we can move on to the next step that is programming and configuring the PCB to work. For programming our PCB we need a USB to FTDI Converter. Now we need to follow the steps given below to...

Software Setup: Tuya IoT Platform
Instructions from Blink an LED on ESP32 board with Tuya Link SDK
Login to your Tuya Account or if you don’t have an account then create one using the SignUp option. Once Logged In, an overview of the platform is visible. Click the Create button to start a new Project. To develop the application for ESP32 click on...

up load the code
Instructions from LED Christmas Pixels
This is the code i have running in 23 Arduinos. you need to download. Install Arduino IDE 1.8.5 FastLED-3.1.0ethercard-master Then open Arduino. From the Arduino IDE: Sketch -> Include Library... -> Add .ZIP Library...Restart...

Open Source Hardware Plant Health Monitor
Instructions from Open Source Hardware Plant Health Monitor
Check out: http://portal-0-vivaplanet.azurewebsites.net/ to see the final output.Step 1: Program the MediaTek 7688 Duo MT7688 After connecting in Station mode to you LAN you can connect to the Duo with ssh. Since I am working on a windows machine I’m...

|<
<
31
32
33