Close

802 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • Cardware
  • Instructions     from Cardware
  • First print out the full set of parts on 200-220GSM card stock. If you are using a dark coloured card, print the templates onto 85GSM photocopy paper and glue it to the card.Score all of the dotted lines well with a sharp point and a ruler. A ball-point...

  • ramanPi - Raman Spectrometer
  • Instructions     from ramanPi - Raman Spectrometer
  • Section: 8Components Required:Printed versions of the following 3D Printed Objects from the gitHub respository:(1x) optics_module_testStand_laserWflangeA Completed Spectrometer532nm 5mw Laser PointerPocket FlashlightClick on the graphic above to...

  • Configure the XBees
  • Instructions     from GePS
  • Prepare Label the XBees with tape and marker pen, one "TX" and the other "RX"Plug the "TX" into the XBee USB adapter and connect it to your computer. Depending on the serial terminal client you use, the connection procedure may...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • And this is the left frame. flowplayer href="http://xxx.xxxxxx.org:8080/stream.flv" style="display:block;width:320px;height:240px" id="player"> flowplayer("player", "flowplayer-3.2.11.swf");

  • CUBEX
  • Instructions     from CUBEX
  • Assemble the CUBEX Motherboard, MCU first, test by reading device ID using the ICSP port, then assemble the rest.

  • Make and Feel Virtual Drawings
  • Instructions     from Make and Feel Virtual Drawings
  • Start drawing on Processing First lets create a code on Processing, which lets you draw freehand on the computer.Download Processing from https://www.processing.org/download/ .Here is the processing code:int prevX=mouseX, prevY=mouseY; //to record previous...

  • Make and Feel Virtual Drawings
  • Instructions     from Make and Feel Virtual Drawings
  • Make Processing control Arduino THE FINAL PROGRAM:So,you have started drawing on Processing. Now, you'll 'feel' the drawing!Imagine you are blind (remember, this device was invented for blind people to draw on computers):How would you feel a raised line...

  • Make and Feel Virtual Drawings
  • Instructions     from Make and Feel Virtual Drawings
  • Power to Servo motor So, we've written the code. Now start all wiring stuff:We have two options:Give 5V to servo motor from Arduino.Here, you can connect the servo motor ( attach a small fan to the motor ) to Arduino Uno. Servo motor has 3 wires: Connect...

  • Make and Feel Virtual Drawings
  • Instructions     from Make and Feel Virtual Drawings
  • Hack a mouse (optional) Open the casing of the mouse, and remove the scroll roller.Now, you should have space to place the servo motor like in the picture.To paste servo motor on the mouse board, use a glue gun or double sided tape.Now, there should...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday