13548 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

All of the steps for the project!
Instructions from Air Pollution Monitoring Project
Let’s get to it! Install Arduino IDE, the esp32 board and the Fixed Libraries. To install the ESP32 board in your Arduino IDE, follow these next instructions: 1) Open the preferences window from the Arduino IDE. Go to File> Preferences 2) Enter https://dl.espressif.com/dl/package_esp32_index.json into...

Code
Instructions from ESP32 Personal Bat Signals with Light and Sound
I used micropython, because I haven't used it for a project yet and I was shocked how well it worked for this. There are many tutorials on how to use Thonny with an ESP32, and I found it to be much quicker than doing this in Arduino/ C++. The main files...

Hummingbird
Instructions from Hummingbird
Step 3: Connect to VivaPlanetThis next step is a bit more complex and requires some C# and visual studio with the Gagetter software from GHI Installed. This will take some time...persist it will be worth it in the end...There are a lot of great tutorials...

"Chad" - The NFC Voting System
Instructions from "Chad" - The NFC Voting System
Reset the ballot count (and records of which tokens have voted) by shorting pin3 to ground and pressing reset.

CASUAL
Instructions from CASUAL
Build instructions are located here http://casual-dev.com/2013/10/22/setting-up-for-casual-development-of-casual/

Free Presidential Style Hotline
Instructions from Free Presidential Style Hotline
Yate(Yet Another Telephony Engine):Answering Google Voice calls that are forwarded to Google chat is tricky if you don't want to use the Gmail chat application. I found the most functional results were achieved by using Yate, to create an SIP server...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
As you can see in the picture, the screen is glued onto the PCB with a thick piece of aluminium between them. Now we have to remove the LCD screen and plate from the motherboard. This is tricky. You must be extremely careful, because the LCD is made...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Now is a good time to cut your EL panel down to size. Lay the LCD on top of it and trace around it with a marker. I chose to have the leads going out the right side (facing the front of the screen). You can cut the EL panel with scissors. You might want...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Now we need to get the metal plate off of the screen. This is the most dangerous part of the project. Get some rubbing acohol and pour it into the holes in the back of the plate. This will help dissolve the adhesive holding it to the screen. I let the...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Take one of those extra pieces of EL panel from earlier and start sliding it between the aluminium plate and the screen. Any other thin piece of plastic will also work. DO NOT USE A KNIFE or any other metal object. Add rubbing alcohol as you go to help...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Now is a good time to test your LCD and make sure it still works. Load the batteries back into the back half of the case. Press the motherboard against the back half of the case so the battery connectors make contact. Use a screwdriver or some other...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
On the back of the LCD there is a reflector and a polarizer. This diagram shows the different layers.The reflector is a thin foil sheet on back of the polarizer. It needs to be removed so the backlight can shine through. The polarizer is a thicker plastic...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Take the new polarizer film and slide it behind the LCD. If you turn the polarizer one way, the screen will be transparrent. If you turn it the other way, the screen will be opaque. Behold the magic of polarized light!Now you have the option of inverting...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Find a good place to mount the push button that will control the backlight. I chose to put mine on the left side of the calculator, as you can see in the pictures. This was a very tight fit though. Some other suggestions would be on the top or under...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Carefully bend the EL panel leads so they fold around the back of the PCB. The panel can bend pretty far, just don't crease it.Now install the board back in the front half of the case and screw it down. The EL panel leads will stick up through gap between...

|<
<
1
2
3
4
5
>
>|