Close

13548 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㎰ 쓰리아워fearful쓰리아워레깅스룸쓰리아워강남술집정보constructed 쓰리아워가격ペゴ쓰리아워wealthy"

  • XIAO Expansion Board with XIAO ESP32C3
  • Instructions     from DIY Digital Watch Project
  • An XIAO ESP32C3 microcontroller and an XIAO extension board manufactured by Seeed Studio comprised the heart of this project. It comes with rich peripherals that include an OLED, RTC, SD Card Sot, passive buzzer, reset/user button, 5V servo connector,...

  • Design
  • Instructions     from DIY Digital Watch Project
  • Initially, we had the idea of reviving an outdated CASIO vintage watch frame that I had with the XIAO expansion board. The expansion board contains the display, microcontroller, RTC and even the battery, so we prepared a rectangular holder that will...

  • Assembly Process
  • Instructions     from DIY Digital Watch Project
  • The holder part is added from the bottom side of the frame after the top part has been assembled onto the watch frame. Two M2 screws are used to secure everything in place

  • Assembly Process: Final
  • Instructions     from DIY Digital Watch Project
  • Next, we connected the JST connector of the expansion board to the JST connector of the LiPo cell.Next, we insert the battery into the top part and secure the expansion board in its proper position.Next, by using four m2 screws, we secure the expansion...

  • RESULT
  • Instructions     from DIY Digital Watch Project
  • Here's the end result of this super-small build: a digital wrist watch. The XIAO expansion board serves as a functional clock module in this useful and functional watch. The inbuilt buzzer can be used as an alarm indicator should we introduce an...

  • Part 1 - The PCB

  • Instructions     from NOOBIX IOT
  • What’s up my friends, welcome back. This below is the PCB that I’ve designed for my project. I’ve tried to make it as small as I could so it could fit inside of a basic wall electric box. This project works at 220V so make sure you stay safe and...

  • Part 3 - PCB Schemati
  • Instructions     from NOOBIX IOT
  • The schematic is quite easy. The basic configuration of the ESP32 chip with pullups to 3.3V for Enable and RST pins. The converter module give us 12V so we connect that in series with the AMS1117 regulators of 5 and 3.3V. The Relay circuit is simple....

  • Part 4 - Assemble the PCB
  • Instructions     from NOOBIX IOT
  • First I solder the voltage converter module. For that add 4 male pins. And on top of those pins we add the converter and we solder it. I also add the input and the output terminals. Then I carefully connect a 220V AC cable at the input. Be careful, and...

  • Part 6 - Arduino CODE
  • Instructions     from NOOBIX IOT
  • Now download the Arduino Code from below. Read the instructions in the code line by line. First, you have to change your wifi name and password. Then scroll down and in the http.begin function change the website from "electronoobs.com" to the...

  • BASIC SETUP
  • Instructions     from PORTABLE Space Trash Game Console
  • Setting up a basic breadboard version of the project, which consists of three push buttons connected to one 1K resistor each between VCC and GND, is the first phase or level. When the button is pressed, a value is obtained at the GPIO Pins, which is...

  • LEVEL 2
  • Instructions     from PORTABLE Space Trash Game Console
  • We used a 55 x 35 mm prototype board for Level 2 of this project and added three push buttons to it: two 6 x 6 mm push buttons for up and down, and one 12 x 12 mm push button for fire.Next we added Three 1K Resistor with each push button.The resistor...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday