Close

3414 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워ｈ 쓰리아워worship쓰리아워레깅스룸쓰리아워가격강남쓰리아워egypt 강남술집정보クＱ강남쓰리아워disorder"

  • Put the HV supply in an enclosure
  • Instructions     from DIY Scintillation Detector
  • Get a metal enclosure, drill holes for 2 connectors - 1 BNC and another one of your choice for 5V power.Drill another 2 holes on the other side - one for the Enable Switch and one for an optional multiturn 5K potentiometer (do not populate footprint...

  • Programming
  • Instructions     from PiTagErrUs
  • The Arduino Micro Pro doesn't like to play with [Ken Shirriff]'s infrared library. [Link]Follow the instructions for installing this library. Once the library is installed, it must be modified to work our hardware. This troubled me and I followed forums...

  • Breathing Detection
  • Instructions     from Breathing Detection
  • Labview and Arduino IntroductionLabVIEW (short for Laboratory Virtual Instrument Engineering Workbench) is a system-design platform and development environment for a visual programming language from National Instruments.To learn about LabView check official...

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • Yate(Yet Another Telephony Engine):Answering Google Voice calls that are forwarded to Google chat is tricky if you don't want to use the Gmail chat application. I found the most functional results were achieved by using Yate, to create an SIP server...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Unscrew the circuit board and pull off the RF shield. Be carefull because once you take the board out there will be nothing holding the buttons in.

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now is a good time to cut your EL panel down to size. Lay the LCD on top of it and trace around it with a marker. I chose to have the leads going out the right side (facing the front of the screen). You can cut the EL panel with scissors. You might want...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now we need to get the metal plate off of the screen. This is the most dangerous part of the project. Get some rubbing acohol and pour it into the holes in the back of the plate. This will help dissolve the adhesive holding it to the screen. I let the...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Take one of those extra pieces of EL panel from earlier and start sliding it between the aluminium plate and the screen. Any other thin piece of plastic will also work. DO NOT USE A KNIFE or any other metal object. Add rubbing alcohol as you go to help...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Take the new polarizer film and slide it behind the LCD. If you turn the polarizer one way, the screen will be transparrent. If you turn it the other way, the screen will be opaque. Behold the magic of polarized light!Now you have the option of inverting...

  • Wearable computer
  • Instructions     from Wearable computer
  • Unscrew one of the threaded caps on the goggles and remove the clear plastic pane. (Your pair may have a silvered or coloured glass pane on top; if so, remove this as well but do not drill into it -- discard it or keep it as backup for the other side.)In...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday