Close

5436 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남레깅스룸ⓨ강남레깅스룸singing강남레깅스강남레깅스룸강남레깅스룸remainder 강남레깅스㉮┢선릉레깅스agitation"

  • IRK! Infrared Remote USB Keyboard
  • Instructions     from IRK! Infrared Remote USB Keyboard
  • Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

  • Super Mario Unlimited

  • Instructions     from Super Mario Unlimited
  • First - If you have further questions on what was actually done, take a look at my two other videos on itCreating a Mr Gimmick Cart and This one I did on Earthbound, showing some wiring that is commonly required. There is a fabulous website that has...

  • Low Cost CO2 Laser Build
  • Instructions     from Low Cost CO2 Laser Build
  • PVC Cooling Jacket for CO2 Laser0PVC Cooling Jacket for CO2 LaserThe adventure begins while I was walking around the local home depot looking at ideas on how to build the laser. I was sort of making it up as I went. Mapping things out in my mind. I wanted...

  • Low Cost CO2 Laser Build
  • Instructions     from Low Cost CO2 Laser Build
  • Mirror Mounts0Mirror Mounts… where to begin, in many ways… these are the make or break it for this project. These have some very high tolerances and requirments. Especially considering I am doing this all by hand, after all, the goal of this project...

  • Low Cost CO2 Laser Build
  • Instructions     from Low Cost CO2 Laser Build
  • Assembling the tube1And now for assembling the laser tube itself. Things needed for this will be a bit of JB weld, a long thin dowl that fits inside your mirror mounts. This will help align them, much better than eyeing it. You will also need some 3/8th...

  • Raptor12 Wireless AC Dimmer

  • Instructions     from Raptor12 Wireless AC Dimmer
  • Axial Components:Were going to start with the polarized components theses only function in the correct orientation. The way to determine the way the go is simple, look for the band around the diode in theses case it is black. Match the band the the symbol...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 1 - Assemble the fittingsLet's get the easy part out of the way first. For this step, you'll need your bag of fittings, the valves, the pressure gauge, a roll of teflon tape, and a crescent wrench.Assembling brass fittings is pretty easy, but...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 2: Prepare the pressure cookerNow for the fun part. In this step, you'll be drilling a hole in your nice shiny new pressure cooker. I know, it's tough, but it's for a good cause.You're going to need: A metalworking drill pressThe pressure cookerA...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 3: Install the bulkhead fittingThis step is very easy, but it's also your biggest potential leak. Don't worry about that too much now; leak hunting is great sport in the world of vacuum chambers, and there's plenty of time for it later. Find your...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 4: Copper tubing and compression fittings It's finally time to put the pieces together.Cut two lengths of copper tubing. One length connects the fittings assembly to the pressure cooker. The other, longer, length connects the fittings to the vacuum...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 5: Final assembly Now is the time for that pressure cooker lid that you set aside earlier.The gasket that's in the lid of the Miro pressure cooker is very easy to remove. Just give it a gentle tug and work your way around the lid. It should come...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday