857 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EA%B2%AC%EC%A0%81%E3%82%88%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8ago%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8eighty%20%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%CE%BA%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%E2%92%B2%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EF%BD%83%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8literary"

Uploading the code
Instructions from Arduino Controlled Safe (Locker)
*** FIRST DOWNLOAD AND INSTALL THE PASSWORD AND KEYPAD LIBRARIES *** JUST EXTRACT THEM IN ARDUINO LIBRARIES FOLDER Install the above mentioned two libraries. You can download them directly from the library manager or you can download the zip file and...

Free run (optional)
Instructions from 68020 minimal homebrew computer
Although optional, it is highly recommended to test the board so far with the free run test. Connecting the databus to the ground, the CPU will read in 0x0000.0000 as an instruction and will execute a kind of NOP (in fact, it will execute ORI.b #0,D0)....

ESP 8266 pin uses and restrictions
Instructions from ESP cookbook
Not all ESP 8266's GPIOs are born equal, something I have now and then been banging my head at (and burned some ESPs). Some are hard wired for some use, like SPI clock and data, some wired to functionality like flashing and booting. For now Wemos D1...

Add your own audio processing
Instructions from ESP32 as BT receiver with DSP-capabilities
Open main\bt_app_av.c Replace the function void bt_app_a2d_data_cb(const uint8_t *data, uint32_t len) with the following code: void bt_app_a2d_data_cb(const uint8_t *data, uint32_t len) { size_t bytes_written; uint8_t *mydat = malloc(len); if(mydat ==...

Router Attack
Instructions from Router Attack
1. Connect buzzer to D7 and Ground2. Connect button to D6 and Ground3. Connect potentiometer to A0, 3.3v and Ground4. Connect battery to VIN and Ground5. Upload the code6. Print the case front7. Fit inside an Altoids can and you are ready

Understanding how to disconnect the speaker
Instructions from Hush Owlet
moThe big black device in the middle of the printed circuit board (PCB) is the speaker (aka buzzer, or transducer). You can see a little slit in the one side where the sound comes out. There is a back side to the circuit board that you cannot easily...

I2C Sensors and debugging
Instructions from Stratux ADSB Receiver and AHRS
I wanted to use a BMP280 I had in my parts bin for altitude measurements. I have used it in the past for a simple weather station and it works great! Turns out, it is even the go to sensor for Stratux, so I went ahead and plugged it in, activated it...

Program the Arduino Microcontroller
Instructions from Simple Automated Model Railway Layout
Make sure to go through the program carefully to understand how it works, later it will be fun to tweak it and make your own modifications./* * Arduino program to control a model train running in a basic oval loop with the help of a feedback sensor....

Portable Altimeter Logger with Display
Instructions from Portable Altimeter Logger with Display
Now on to hooking up the hardware.for the BMP 180, 3.3V to VCC (5v will fry the BMP 180)GND to GNDAnalog 4 to SDAAnalog 5 to SCLFor the display,in the format Microcontroller Pin to Bubble Display pin:D8 to P1D5 to P10D11 to P4A1 to P6D14 to P12D6 to...

Controller
Instructions from Raspberry SPy Robot
Then came the part of how to control a Raspberry Pi over WiFi, because Bluetooth has too little range. I decided on using a Flask server running on the Raspberry PI and an ESP8266 ESP12E module to send data to it. The ESP8266 only has one analog input,...

How to make 2d plane Five Link Mechanism
Instructions from Five Link Mechanism
We make model with LED display. We use folder tablet for paper as an base, and diagram millimeter paper. Let us see the schematics and the photo of the Model. We use plane We can tune the angles of servos ϕ and ψ by...

Run a Program
Instructions from Arduino Wattmeter - Voltage and Power Consumption
#include int Read_Voltage = A1;int Read_Current = A0;const int rs = 2, en = 4, d4 = 9, d5 = 10, d6 = 11, d7 = 12; LiquidCrystal lcd(rs, en, d4, d5, d6, d7);float Voltage = 0.0;float Current = 0.0;float Power = 0.0;void setup() { lcd.begin(16, 2); Serial.begin(9600);...

EEPROM Pinout and Connection
Instructions from How to Add an EEPROM to Raspberry Pi Pico
The EEPROM has 8 pins, of which 3 are address pins as shown in the figure. The communication between the EEPROm and the microcontroller is via I2C. By setting the address pins A0, A1, A2 to either high or low, the default I2C address of the EEPROM chip...

The Spinning Spectrometer
Instructions from The Spinning Spectrometer
Arduino Code// Arduino code for THE SPINNING SPECTROMETER // // This code is released under the beerware license: As long as you // retain this notice you can do whatever you want with this stuff. If we // meet some day, and you think this stuff is worth...

Attach the nosepoke wires to the LCD shield.
Instructions from ROBucket
1. Place three short pieces of heat shrink tubing around the bundle of 9 wires coming from the nose poke apparatus. Do not heat shrink these yet. 2. Route this bundle of wires underneath the relay module (you may want to unscrew it to do this). ...

|<
<
2
3
4
5
6
>
>|