Close

954 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

  • Unruly signals: S.O.S....
  • Instructions     from Open Source LiDAR - Unruly
  • SignalPinPortActionDescriptionRESETNJP4.14External reset control+3V3JP4.13Digital power lineAREFJP4.12Fixed at 3.3VHVIJP4.115V supply for laser and APDLASER_POWERJP4.10A0DACSet laser powerTHRESHOLDJP4.9A1DACComparator thresholdBIAS_VOLTAGEJP4.8A2ADCAPD...

  • Transformer Build
  • Instructions     from 350 Watt True Sine Inverter
  • This instruction is for building the transformer.  It describes materials and fabrication guidance but assumes the reader has experience assembling magnetics.  Additional information can be found in the magnetics zip file and the 'inductors'...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Program odds display)The board will receive the same 5 digit signal as the other boards, and break out the first two digits to print the odds.Left 5 odds display:#include int h45odds = 0; int h35odds = 0; int h34odds = 0; int h25odds = 0; int h24odds...

  • Source Code
  • Instructions     from Arduino Amazing Interactive Snowflake
  • #include "SoftPWM.h" #include byte edgeLedPins[] = {13, A4, A5, 2, 8, 12}; byte middleLedPins[] = {10, 6, 3, 5, 9, 11}; byte innerLedPins[] = {A2, A3, A1, 4, 7, A1}; ADCTouchSensor touchSensor = ADCTouchSensor(A0, 1); void setup() {   Serial.begin(115200);...

  • The Spinning Spectrometer
  • Instructions     from The Spinning Spectrometer
  • Arduino Code// Arduino code for THE SPINNING SPECTROMETER // // This code is released under the beerware license: As long as you // retain this notice you can do whatever you want with this stuff. If we // meet some day, and you think this stuff is worth...

  • Simple digital watch
  • Instructions     from Simple digital watch
  • Wiring the displayTo Wire the display you just need two wires for communication because it uses a I2C protocol and two for power so 4 in total. The two wires for the communication need to go to pin A4 and A5 and power to power. The wiring:A4 - SDAA5...

  • Joystick module
  • Instructions     from MSX on RC2014
  • This is a very simple module, it contains the two joystick ports and some logic.  It depends on the sound module for the i/o. As per the earlier instruction step, the *R6* of Ed's sound module is required because earlier revisions can't be jumpered...

  • Back Panel
  • Instructions     from Modular Display Clock
  • The components are attached to a baseplate (95(W) x 128(L) mm), which is fitted to the back of the MDE's with M3 X 25mm bolts and 10mm standoffs. Four bolts are fitted through the holes in the Neopixel support board and the standoffs fitted to attach...

  • Arduino Code
  • Instructions     from OBS_IRL_STREAM_DECK
  • It's in the GITHUB! The code comes down the these smaller steps: MQTT handling and Button handling. Let's do button handling first. I made a simple button object with the pin number, button press boolean, and button count. struct Button { const uint8_t...

  • GCODE Commands
  • Instructions     from DIY Inkjet Printer
  • The printer can be controlled by sending values via i2c. Each set bit represents a printer command like: 0 - everything off 1 - single drop printhead 1 2 - single drop printhead 2 4 - single drop printhead 3 8 - single drop printhead 4 16 - drops at...

  • Connections
  • Instructions     from Autonomous Litter Detection Robot w/ Edge Impulse
  • // Connections // Raspberry Pi 4 : // L298N Motor Driver Module // GPIO 17 ----------------------- IN_1 // GPIO 27 ----------------------- IN_2 // GPIO 22 ----------------------- EN_A // GPIO 10 ----------------------- IN_3 // GPIO 9 -----------------------...

  • ESP 8266 pin uses and restrictions
  • Instructions     from ESP cookbook
  • Not all ESP 8266's GPIOs are born equal, something I have now and then been banging my head at (and burned some ESPs). Some are hard wired for some use, like SPI clock and data, some wired to functionality like flashing and booting. For now Wemos D1...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday