Close

163 Results for "%E3%80%8A%EC%B5%9C%EC%A0%80%EA%B0%80 O1O%CE%9E5793%CE%9E7458%E3%80%8B %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%E3%86%8B %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%85%94%EC%B8%A0%EB%A3%B8applause%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%EC%8B%A0%EC%82%AC%EC%95%84%EC%9D%B4%EB%A6%B0%EC%A3%BC%EB%8C%80caught %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%E3%8F%87%E3%85%97%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0queer"

  • Wire
  • Instructions     from Hybrid Sim Yoke
  • Wire as follows:  Both potentiometers Pin 1: 5v Both potentiometers Pin 3: ground Left potentiometer Pin 2: A0 Right potentiometer Pin 2: A3. Note that they have two channels, and all three wires have to connect to the same channel...

  • Step 3
  • Instructions     from ESP32-Driven Bluetooth Image & GIF Display
  • Add ESP32 board Open the Arduino IDE.Go to File> Preferences.In the “Additional Boards Manager” URLs field, add the following URL: ‘https://dl.espressif.com/dl/package_esp32_index.json’.Click OK.

  • Connect to Arduino
  • Instructions     from 4-Channel Optogenetics Pulser
  • Plug the collated ground wires into an Arduino Ground pin, and the collated +5V wires into a +5V pin (if using a Due, use the +3.3V pin or you will damage the microcontroller) and plug the other jumper wires into the correct I/O pins: Toggle switches...

  • Airframe - Step 12
  • Instructions     from MiniHawk VTOL
  • For each Motor Mount, ream the Motor Mount linkage mount hole to 1.19mm (3/64 Inch, 47mil). This should be about 80% of the major diameter of the threaded ball link to be mounted. (Great Planes Threaded Ball Link Set 1/16", GPMQ3843; ball-link is 1.50mm...

  • Getting all Misty
  • Instructions     from The Little Green Tower
  • To twist a phrase, into every aeroponics system a little mist must fall.  Below is a picture of the spray nozzles used in the LGT.  One of the best things about them is that they are compatible with the 3/8" push-lock Tee fittings that...

  • WiFi ePaper
  • Instructions     from WiFi ePaper
  • Flash a NodeMCU firmware imageFor flashing a new image, I use esptool. Plugin your NodeMCU module to an USB port, clone the esptool project and flash your firmware. Usually a new device will appear, like /dev/ttyUSB0. Step by step:git clone https://github.com/themadinventor/esptool.git...

  • Camera and LED Panels mounting
  • Instructions     from A DIY Imaging Fluorometer
  • Here is where the fun starts. Find the centre of the heatsink and drill a 16mm hole. This is to accommodate the USB 3 cable to connect the camera and the LEDs wiring. Put the USB cable through the hole and connect it to the camera. Please the camera...

  • WRONG PROJECT 2
  • Instructions     from WRONG PROJECT 2
  • Step 3. Cleaning and Dispersion of Chinese Supercritically Extracted AsphaltenesFollow all lab safety procedure.Place 20 grams of dried asphaltenes into a tared flask, record the weight. Add 300-400 mL of acetone to the jar.Place a stick blender into...

  • Firmware upload overview
  • Instructions     from Pedalino™
  • Pedalino is using 2 boards and 3 microcontrollers. All of them need to be flashed with the right firmware before using Pedalino. ModelBoardMicrocontrollerFirmwareInstructions BothArduino Mega 2560ATmega2560ATmega16U2PedalinoMocoLUFAClick hereClick here and hereAESP-01S...

  • HTML, CSS and JS using SPIFFS
  • Instructions     from WebServers on ESP32
  • In this project, we will host a server on the ESP32 dev board, which will display Temperature, Humidity, Altitude, and Pressure from the BME280 sensor module. It is the same as LIVE Display of Data on ESP32but this time the file for Web Page can be easily...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday