Close

3465 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남드림ㅮ강남드림within강남드림드림레깅스룸강남드림레깅스룸horrid 드림레깅스룸ギ∑드림레깅스룸thorough"

  • Modular cartesian machines
  • Instructions     from Modular cartesian machines
  • Here, the basic module modified to be used as axis X of the plotter. It is exactly the same structure only the size of the rods has been modified and we have exactly those that we needed and keeping strictly background's rules.

  • Modular cartesian machines
  • Instructions     from Modular cartesian machines
  • We have two modules suitably resized to be used as axi X (red) and axis Y (blue). We needed this two similar structures, and placed it in orthogonal form, that is, his axes displaced 90 degrees one respect the other. In this image we see how we must...

  • Modular cartesian machines
  • Instructions     from Modular cartesian machines
  • This green piece join the two structures. With the hole for the linear bearing in the bottom part and the space for the corner pieces in the upper part. With four of this green pieces and four linear bearing we can join the two structures and can move...

  • Modular cartesian machines
  • Instructions     from Modular cartesian machines
  • The complete mechanism. The light blue pieces,the rod,and the magenta pieces, connect de X axis to the belt moved by the motor in the Y axis. In the X axis, the four green pieces form a platform where we will fix the pen holder. The yellow piece joined...

  • TS9 to F connector
  • Instructions     from TS9 to F connector
  • Cut off a short section of RG-59 cable.  Strip both ends so you are left with the center conductor, an inch of exposed wire on one end, and 3/8in on the other.  Rotate it between your fingers and sand down the remaining foam insulation so it...

  • Goliath - A Gas Powered Quadcopter
  • Instructions     from Goliath - A Gas Powered Quadcopter
  • BUILDING THE UPPER FRAMETools - Miter Saw, Jig Saw or Tin Snips, File, Drill with #30 drill bit,Rivet PullerA) Build the Jig for the Upper FrameTo properly build the frame, jigs are required to hold all of the frame elements in place. The jig is constructed...

  • Single Chip AVR BASIC Computer
  • Instructions     from Single Chip AVR BASIC Computer
  • Required Components:The component list for this computer is fairly low as only a single IC is required: 1 x ATmega 1284P Microcontroller 1 x DIL 40 Pin 0.6" IC Holder 1 x 40 Pin Female Pin Header (to be cut down into smaller headers) 1 x 16 MHz Crystal...

  • ramanPi - Raman Spectrometer
  • Instructions     from ramanPi - Raman Spectrometer
  • Below is a list of build instruction logs that will instruct you on how to go all the way from sourcing your components to printing the parts, and constructing your very own raman spectrometer!To begin, you will need some tools..  Pretty much every...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday