171 Results for "3D printing"

Building the AUV - External
Instructions from Project Albatross
With the communication system working, one of the final major tasks left was constructing the AUV. Our initial designs for the AUV were pretty simplistic, as we did not realize the enormity of the many mechanical challenges involved in getting a vehicle...

General instructions
Instructions from Building a Polybius Arcade Cabinet
The Basics I found a plan on this website. It's not a bad start but the design misses a few key dimensions - we had to work out a few of them with a bit of maths. Still, it's something. We built the cabinet out of 12mm plywood which is quite strong,...

Instructions:
Instructions from Laser XY Scanner
Step 1: Gather Your Components Laser XY Scanner - BOM I usually like to source my parts from DigiKey, but the low-cost options on Amazon are hard to beat sometimes. This list is just one of many sources for each component in the BOM. There are of...

Coffee time
Instructions from Coffee time
Coffee machine HackProject has been done in Amiqual4Home Equipex Creativity Lab - https://amiqual4home.inria.fr/We worked with ENSIMAG students of Café Sourire ProjectTo hack : Saeco Intelia Coffee MachineDescriptionYou purchased a Saeco Intelia...

Head Gesture Recognition
Instructions from TV Remote Control based on Head Gestures
Once the system is turned on by an AT switch, the camera starts capturing frames from the user's face/head and the image processing take place through computer vision techniques. The head gesture recognition task is performed by the combination of two...

Spectrum Analyser Code
Instructions from Spectrum Analyser Code
SoftwareThe code can be downloaded from the project downloads page. But here it is:#include const static char ASCII[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, // 20 0x00, 0x00, 0x5f, 0x00, 0x00, // 21 ! 0x00, 0x07, 0x00, 0x07, 0x00, // 22 " 0x14, 0x7f,...

|<
<
10
11
12