14760 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

High Power, low cost Nerf gun
Instructions from High Power, low cost Nerf gun
standard PVC glue to put everything together.

Assemble everything
Instructions from Blinkenschild 2.0
TODO: pictures of assembly

wire everything up.
Instructions from MIDI Shoes
connect the midi inputs to the analog pins of the arduino.

Measure first
Instructions from Better Cooling for 3D Printer Extruders
Make sure you get everything that you need to mod your extruder. Measure everything, check the spacing and clearance of parts, and be ready to get creative.

Building the AUV - Internal
Instructions from Project Albatross
The internals of the AUV performed the heavy work of actually taking water quality measurements and controlling the submersible's buoyancy. Evidently, it also required a sophisticated mechanical design to fit the necessary components into the confined...

Connected Can Crusher: C^3
Instructions from Connected Can Crusher: C^3
Assemble electronics from schematic. I reccommend laying everything out first, and then soldering components. Be wary of busses that are tied together on the Proto board.

littleBits Halloween Creepy Portrait
Instructions from littleBits Halloween Creepy Portrait
While everything is lined up, with a pencil, mark where the normal set of eyes should eventually sit on the back panel through the eye cutouts.

PIR Sensor with Push Notifications to Smartphone
Instructions from PIR Sensor with Push Notifications to Smartphone
Wire everything up (See tutorials in 433utils/wiringPi) tl;dr data to pin 2, and then vcc and gnd.

Mandalorian Infiltration Vambrace
Instructions from Mandalorian Infiltration Vambrace
Step 2: Order some stuff. Find the shopping list above in the components section and purchase everything from Amazon, Harbor freight, or your local Walmart.

Artificial Tiberium Cluster
Instructions from Artificial Tiberium Cluster
Burry everything into a planting pot. I would recommend planting clay. If you want to use soil, you might take further preservations of the electronics.

DP Ventilator
Instructions from DP Ventilator
You need at least a 3D printer with a volume of 210mm x210mm , I printed everything with the prusa MK3 printers, they are perfect!

Make bootable USB and set up software
Instructions from Digital Photo Frame from obsolete laptop
Test everything before you take it apart - then make backup of the USB or config files.

Spobo Speakers
Instructions from Spobo Speakers
After everything is taken apart you have to solder everything together. I like to start with making the two speakers one and after I've done that I solder the 1600 battery to the main chip so the speakers have a lot of power to use.

Resin-in-resin
Instructions from Resin-in-resin
Last layerOnce this layer partially cures, mix up another batch of epoxy and coat everything again. Make sure everything is totally submerged at this point. Now let it cure overnight.

How to test
Instructions from 3D printed cute barometer
After you mount everything together, you should have a visible movement of the needle when you hold the jar into your hands. The mild heating of the jar in this case, causes the air trapped inside to expand and to move the membrane upwards. This quick...

1
2
3
4
5
>
>|