Close

6780 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워ｈ 쓰리아워worship쓰리아워레깅스룸쓰리아워가격강남쓰리아워egypt 강남술집정보クＱ강남쓰리아워disorder"

  • Part 2 - What we need
  • Instructions     from NOOBIX IOT
  • Let's see all the needed parts and also check the schematic for this project below in order to know where to connect each part. We need the 220V to 12V regulator, the solid-state relay, an ESP32S smd version, some SMD capacitors and resistors, a diode,...

  • Part 3 - PCB Schemati
  • Instructions     from NOOBIX IOT
  • The schematic is quite easy. The basic configuration of the ESP32 chip with pullups to 3.3V for Enable and RST pins. The converter module give us 12V so we connect that in series with the AMS1117 regulators of 5 and 3.3V. The Relay circuit is simple....

  • Part 4 - Assemble the PCB
  • Instructions     from NOOBIX IOT
  • First I solder the voltage converter module. For that add 4 male pins. And on top of those pins we add the converter and we solder it. I also add the input and the output terminals. Then I carefully connect a 220V AC cable at the input. Be careful, and...

  • Part 5 - Website + Database
  • Instructions     from NOOBIX IOT
  • Please check my previous tutorial about IOT with the ESP32 in order to understand more because I won’t go over those steps again. In the video below you learn how to make the website, the database, the internet connection and so on. Follow...

  • Part 7 - Full Tutorial Video
  • Instructions     from NOOBIX IOT
  • Now as you can see in the tutorial video, each time I toggle the button on my website, the LED on the NOOBIX board is also turning on and off. But we can also connect it to high voltage. Connect a 220V load at the output. Then we add a cable at the input...

  • LEVEL 2
  • Instructions     from PORTABLE Space Trash Game Console
  • We used a 55 x 35 mm prototype board for Level 2 of this project and added three push buttons to it: two 6 x 6 mm push buttons for up and down, and one 12 x 12 mm push button for fire.Next we added Three 1K Resistor with each push button.The resistor...

  • RESULT
  • Instructions     from PORTABLE Space Trash Game Console
  • Here's the result of this small build- a completely functional portable game console, loaded with the classic space trash game from old Nokia phones. The ESP32C3 chip is the reason that this setup functions flawlessly. Although the code is somewhat lengthy,...

  • Hardcoded Settings in main.cpp / Installation
  • Instructions     from PV Energy Management
  • On first the Code Checks if Settings Uploaded as config.json in Spiffs Image, then starts first as Access Point (Captive Portal) to set these Settings if Settings not available at Boot. Other Hand there are Five Settings they are hardcoded: NTP Server...

  • Find and replace
  • Instructions     from Industry 4.0: An economical SAAS MES part 2
  • SearchReplace withNumber of expected changes/my_custom_url/PRIVATE/db_config.phpThe real URL of your db_config.php file10dbs12345678The name of your database2Europe/ParisYour TimeZone. The list of supported time zones can be found at:https://www.php.net/manual/en/timezones.php1...

  • Modify the Shell
  • Instructions     from GPiA
  • Now affter testing everything, try fitting the screnn into the shell, if nessesary remove some plastic with an exacto knife. If it fits try around with the other parts:The Speaker should fit if you're using an original GBA one, or a little cut on one...

  • Connect the I2S Amp
  • Instructions     from GPiA
  • Now Connect the I2S Amp VCC to 5V PIN(2/4) GND to any GroundBCK to Pin 12 LRCK to Pin 35DIN to Pin 40

  • PCB Design
  • Instructions     from Power Monitoring for your Mobile Home
  • The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used.  The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...

  • How to install the bash prompt
  • Instructions     from Beautify Your Bash Prompt
  • Check for Existing .bash_prompt:First, you need to check if there's already a .bash_prompt file in your home directory. Execute the following command: ls ~ -a | grep .bash_prompt Rename Existing '.bash_prompt': If you find an existing .bash_prompt and...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday