Close

3126 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • GLaDOs Replica for RORI
  • Instructions     from GLaDOs Replica for RORI
  • Assemble itFor the head :Put the RGB LED.Then, fix the camera:And the two servomotors:Then, the high part of the body:The fix the down part and the base (One motor is missing because I don't receive it):Put the sticker:Get some wires:Build the first...

  • Authentic Blueprints
  • Instructions     from Authentic Blueprints
  • Expose the ImageLay the transparency on top of the photo paper and set it outside under a sheet of glass or acrylic. Professionals would use a UV light box (some of you may already have one for making PCBs), but 20 minutes in the California sun works...

  • Futurama's Jack dispenser
  • Instructions     from Futurama's Jack dispenser
  • What you should consider when choosing an amplifier: First you should consider the number of inputs and outputs you want;Then after you should consider the output power;Power supply get quickly expensive when you want more than 100W output and you might...

  • Futurama's Jack dispenser
  • Instructions     from Futurama's Jack dispenser
  • If you want to add a webui for whc-switch, that will allow you to add/remove netctl profiles, you first need to install a webserver as the webui doesn't have a standalone webserver at this moment. We choosed lighttpd as it is light and easy to install...

  • Futurama's Jack dispenser
  • Instructions     from Futurama's Jack dispenser
  • After installing Arch Linux using N.O.O.B.S, you can start and login with the account root and the password root.The first thing you should do is set up the network and update your system. You could plug it on a wired connection or launch wifi-menu if...

  • Futurama's Jack dispenser
  • Instructions     from Futurama's Jack dispenser
  • If you're still connected to the internet, you should install whc-switch, a python script we made especially for our project (but it can be used for other projects). It is actually designed to handle the WiFi mode of our Jack Dispenser with (as its name...

  • Wireless Flux Capacitor
  • Instructions     from Wireless Flux Capacitor
  • 1. The first thing I did after coming up with the idea is to find a way to control 3 sets of 8 leds on each with a minimum amount of wires.  I found an article that talked about shift registers and went ahead and ordered a few to try them out. following...

  • Web UI for MSP430 launchpad
  • Instructions     from Web UI for MSP430 launchpad
  • Running the server:The server will run on port 8080 (you can change this in the server.js file if required)Run server : node index.html (first cd to your project directory) locatunnel :  lt --port 8080The localtunnel will generate a subdomain...

  • Mk 16 Capital Ship MDM
  • Instructions     from Mk 16 Capital Ship MDM
  • Build Payload MPDB:1)  3D printed parts needed 1x MPDB 1a1x MPDB 1b1x MPDB 21) Cut Material: Cut 1" tubing to 212mmCut 3/8" tubing to 130mmCut 3/8" tubing to 30mm2) Construct Take 30 mm section of 3/8" tubing and place it into the center hole in...

  • WeMo Garage Door Opener
  • Instructions     from WeMo Garage Door Opener
  • The first step is to find out how your garage door opener works. What you need to figure out is what happens when you press the physical switch (assuming you have one). If all you have is wireless remotes then you have to look closely at the garage door...

  • Starfleet Communicator Badge
  • Instructions     from Starfleet Communicator Badge
  • Solder the amplifier circuit, dead bug style.Solder the speaker output of the Bluetooth headset to the 100 Ohm resistor. Cut the heat shrink tube to cover,Solder the resistor now to pin 2 of the TransistorSolder pin 3 of the Transistor to the Power connection...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • Now that you have gotten some of the parts, and hopefully stocked your parts bins and caused some carnage in the process, we are ready to proceed.  This is the end goal of this hullabaloo:You will wind two large inductors using the cores you salvaged...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday