Close

4290 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Low Cost CO2 Laser Build
  • Instructions     from Low Cost CO2 Laser Build
  • NaCl Window0NaCl Window and and Mirror – DIY OCWell, I decided to give this a try for the OC of the CO2 laser. A simple gold mirror with a hole in the middle and a salt window. The hole was easy, I simply put a glass drill bit into a battery powered...

  • Raptor12 Wireless AC Dimmer

  • Instructions     from Raptor12 Wireless AC Dimmer
  • Back of ACLogic:Make sure you assembly from the correct side:)Solder the atmega(expand)Microelectronic stuff:atmega328p 22pf cap x216Mhz CrystalAxial Components:4.7KOhm Resistos x1310ohm x11MOhm x1120kOhm x33kOhm 1x22k 1x5.1v Zener x2Transistors and...

  • Raptor12 Wireless AC Dimmer

  • Instructions     from Raptor12 Wireless AC Dimmer
  • This is a .22uf capacitor, this is non polerized ceramic so it can go ether direction. This helps controle the clipping voltage of the main fet.C3 and C4 are small .22pf theses are not the same as the perviose step. Theses capacitors setup the imedance...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 1 - Assemble the fittingsLet's get the easy part out of the way first. For this step, you'll need your bag of fittings, the valves, the pressure gauge, a roll of teflon tape, and a crescent wrench.Assembling brass fittings is pretty easy, but...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 2: Prepare the pressure cookerNow for the fun part. In this step, you'll be drilling a hole in your nice shiny new pressure cooker. I know, it's tough, but it's for a good cause.You're going to need: A metalworking drill pressThe pressure cookerA...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 3: Install the bulkhead fittingThis step is very easy, but it's also your biggest potential leak. Don't worry about that too much now; leak hunting is great sport in the world of vacuum chambers, and there's plenty of time for it later. Find your...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 4: Copper tubing and compression fittings It's finally time to put the pieces together.Cut two lengths of copper tubing. One length connects the fittings assembly to the pressure cooker. The other, longer, length connects the fittings to the vacuum...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 5: Final assembly Now is the time for that pressure cooker lid that you set aside earlier.The gasket that's in the lid of the Miro pressure cooker is very easy to remove. Just give it a gentle tug and work your way around the lid. It should come...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday