82 Results for "3D printing"

For those of you who prefer to watch something instead of reading I have created a detailed tutorial video. Don't worry though, everything in the video (and a little more) is all explained in this guide. Though, even if you will read through this guide...

Introduction This design uses rectangular brass plates cut from one long sheet. The amount of overlap between plates and the spacing between plates determine the capacitance. In this design, we use 3.06 mm thick brass nuts on threaded rod to space the...

This picture is of my "indoor" seismometer, with its electronics in an antique wooden box next to it. It is networked and completely functional, but because of its noisy indoor location, it is not useful for any serious seismology. It is never quiet,...

Bellow is a list of all the parts you will need. There are only two kinds of parts which are custom and they are the waterjet cut aluminum frame parts and the axle spindle.  Waterjet Aluminum Parts I would recommend you start by visiting https://gallery.autodesk.com/fusion360/projects/107744/bellcycles-v1-2-bicycle the...

With the communication system working, one of the final major tasks left was constructing the AUV. Our initial designs for the AUV were pretty simplistic, as we did not realize the enormity of the many mechanical challenges involved in getting a vehicle...

Step 1: Gather Your Components Laser XY Scanner - BOM I usually like to source my parts from DigiKey, but the low-cost options on Amazon are hard to beat sometimes. This list is just one of many sources for each component in the BOM. There are of...

I made a status indicator that notifies me of my body's relative state of arousal! To help me visualize what's going on with the myriad of wearables I have set out to don at once, I've created an arm-mounted screen display that will tell me what I need...