Close

3790 Results for "∇ 최저가 Ò1Ò《⑤⑦93》74⑸⑻ ∇삼성동뉴테란Ω선릉뉴테란consent삼성동뉴테란ゑ선릉뉴테란ice 강남뉴테란ｆ선릉뉴테란√강남뉴테란ηⅡ뉴테란셔츠룸knight"

  • Battery Tutorial for SG circuit
  • Instructions     from Battery Tutorial for SG circuit
  • Greetings fellow Enthusiasts Let me introduce myself. I'm Bones MacGyver. I like to make sparks.I'm going to do my best to help out the community with their battery woes.By no means am I a battery expert. But I have used and abused MANY Ni-Cd cells (and...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • PLEASE NOTE:  Before you dive right in and assemble your Wave shield, there are a few things you will need to take note of:  Make sure that you use the 'Stacking headers' on your wave shield.  It will be in the middle of the stack so that...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • Winding the inductors is easier than you might think!  I used about 4 feet of 18GA Magnet wire to wind the inductors for this particular power supply.  Each inductor has ~30 turns on it for an inductance of about 90uH.  If you don't have...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • Now that the PSU is done, Arguably the most difficult part, the rest is pretty easy.  There are two major components that need to be built now:  The control circuit for the HV psu, and the Hand sensor.These are the last two critical custom...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • In this step, how the Arduino shield stack gets assembled, and how to wire your wave shield will be discussed.  If you remember the note from the top in step 1, You hopefully used stacking headers to build your wave shield.  If you didn't,...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • First, here is the block diagram:You'll note that there are two relays in this circuit.  These are used to connect the HV output to the hand electrode, and turn on the 12V supply to the Amp and HV power supply.  You can spider wire them in...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • To get a good idea how we made the electrodes, you can read the project update entitled "The Hand Thingie".  If you want to use the same sensing set up we used, this worked well.  Any sort of Object that is fairly ergonomic and can have the...

  • Animatronic AVP Predator cannon

  • Instructions     from Animatronic AVP Predator cannon
  • Cannon code- #include "Servo.h" // include the servo library Servo armServo; // servo to raise the arm Servo cannonServo; // servo to recoil cannon // these constants won't change: const int triggerSensor = 1; // the sensor is connected to analog pin...

  • Ikea Lack Infinity Table
  • Instructions     from Ikea Lack Infinity Table
  • Acquire the table.These things are mostly made of cardboard. Not joking.For that reason, when you start cutting apart large internal sections of it, it start to become VERY weak. Try to leave a large edge section to help with the structure of the table,...

  • Ikea Lack Infinity Table
  • Instructions     from Ikea Lack Infinity Table
  • Painting. I used the cheapest home depot flat black paint I could find, I painted the whole top, inside, covered all my dremel marks. ;)I also laid out the led strip and put a sticky dot over each emitter, I then used some Duplicolor engine enamel and...

  • Animatronic Iron Man MKIII suit
  • Instructions     from Animatronic Iron Man MKIII suit
  • A few notes and tips concerning the use of servos in the build:The servos listed are just what we used based on speed, power, durability and cost requirements. I would definitely recommend using metal gear servos with ball bearings. Nylon geared servos...

  • Animatronic Iron Man MKIII suit
  • Instructions     from Animatronic Iron Man MKIII suit
  • Notes about tools and materials used:ProPoxy 20 is awesome stuff. When making the brass tube pivots for the shoulder rocket pods it was easiest to glue the brass tube to the servo casing with superglue ( I use Gorilla glue with a spray accelerator) and...

  • Late Night Reading Lamp
  • Instructions     from Late Night Reading Lamp
  • Solder LEDs, resistors etc onto a bit of veroboard. I used a female PCB header for plugging in the battery so that I didn't have to route long cables around the frame. Leave some length on the LED pins so that they stand up a bit from the veroboard
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday