3790 Results for "∇ 최저가 Ò1Ò《⑤⑦93》74⑸⑻ ∇삼성동뉴테란Ω선릉뉴테란consent삼성동뉴테란ゑ선릉뉴테란ice 강남뉴테란ｆ선릉뉴테란√강남뉴테란ηⅡ뉴테란셔츠룸knight"

Shootable ALIENS Egg & Jumping Facehugger Target
Instructions from Shootable ALIENS Egg & Jumping Facehugger Target
Attach the Egg to the front of the popper. I used some caulking, but any sturdy, gap-filling glue should do the trick.

Portable LED Floodlight
Instructions from Portable LED Floodlight
Ok, the next part selection can fairly important depending on your taste, but in a pinch you could use anything. I've found this to be one of the best:It's a seasonal though so good luck.OK anyway, Digikey has a free online schematic drawing tool. I...

Portable LED Floodlight
Instructions from Portable LED Floodlight
Get yourself a box, and you put that stuff in the box.What I ended up doing here is mounting metal supports to the metal tripod pole. I then used lacing twine and laced the battery to those supports, the plastic bin is basically just sandwiched in there....

ChipWhisperer®: Security Research
Instructions from ChipWhisperer®: Security Research
Optional (see #5, option of hard or soft enclosure): Make an enclosure out of a Hammond 1455N1602 case (Digikey part # HM980-ND). This case has plastic end panels which you can easily modify with a hot knife, file, etc. For the front panel you can print...

RoboBarista: A Coffee Brewing Robot
Instructions from RoboBarista: A Coffee Brewing Robot
The first step to a good coffee brewing robot is to figure out how to brew good coffee. I've got some tips and tricks to brewing good coffee in the project logs ("A Dive Into the World of Coffee"), so I'll get directly into how I achieve good, full bodied...

IRK! Infrared Remote USB Keyboard
Instructions from IRK! Infrared Remote USB Keyboard
Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

Making a BR-900CD Stand on its own
Instructions from Making a BR-900CD Stand on its own
After reminiscing about my audio recording gear, I started thinking about a stand that I had purchased with the express idea of mounting the BR-900CD onto. It was a heavy duty music stand that I had picked up on sale for 20 dollars. After I got it home,...

Atari 5200 Custom Controller Build
Instructions from Atari 5200 Custom Controller Build
The problem lies in the lack of response, over time the little pads inside become corroded and unresponsive. Eventually, no amount of cleaning and disassembling actually fixes this and you end up replacing either the entire controller or purchasing one...

Low Cost CO2 Laser Build
Instructions from Low Cost CO2 Laser Build
PVC Cooling Jacket for CO2 Laser0PVC Cooling Jacket for CO2 LaserThe adventure begins while I was walking around the local home depot looking at ideas on how to build the laser. I was sort of making it up as I went. Mapping things out in my mind. I wanted...

Low Cost CO2 Laser Build
Instructions from Low Cost CO2 Laser Build
Mirror Mounts0Mirror Mounts… where to begin, in many ways… these are the make or break it for this project. These have some very high tolerances and requirments. Especially considering I am doing this all by hand, after all, the goal of this project...

Low Cost CO2 Laser Build
Instructions from Low Cost CO2 Laser Build
Assembling the tube1And now for assembling the laser tube itself. Things needed for this will be a bit of JB weld, a long thin dowl that fits inside your mirror mounts. This will help align them, much better than eyeing it. You will also need some 3/8th...

Low Cost CO2 Laser Build
Instructions from Low Cost CO2 Laser Build
NaCl Window0NaCl Window and and Mirror – DIY OCWell, I decided to give this a try for the OC of the CO2 laser. A simple gold mirror with a hole in the middle and a salt window. The hole was easy, I simply put a glass drill bit into a battery powered...

DIY Variac
Instructions from DIY Variac
After some looking around I got this one for 30 dollars.It was bare, but that is ok. I looked around for a container for it, and could not find one that I liked. I considered building one out of wood, but chose against that as well. One option was to...

650nm 5mw Laser Build
Instructions from 650nm 5mw Laser Build
After some scrounging around I found a cheap axis laser housing with diode and driver board still intact! For me, this is a mirracle as most of the time, I usually disassemble things when I first get them.After I scrounged up the rest of the parts I...

The HYDRA multiheaded virtual computer
Instructions from The HYDRA multiheaded virtual computer
Gather parts to build a system for your intended purpose:Research your system board & processor & be double or more sure it is supported. Number of PCIe, PCI should reflect what you want to run. Internal serial HEADER is preferable over DB9 on...

|<
<
3
4
5
6
7
>
>|