465 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

Run a Program
Instructions from Arduino Stopwatch
#include #include LiquidCrystal_I2C lcd(0x27,20,4);//this values will help us to choose the timelong last_change;long last_value;long timer_value;void setup(){//inti lcdlcd.init();//turn on backlightlcd.backlight();pinMode(A0, INPUT);pinMode(8, OUTPUT);}...

Attach the nosepoke wires to the LCD shield.
Instructions from ROBucket
1. Place three short pieces of heat shrink tubing around the bundle of 9 wires coming from the nose poke apparatus. Do not heat shrink these yet. 2. Route this bundle of wires underneath the relay module (you may want to unscrew it to do this). ...

▇▇▇▇ Understanding Basic Logic Gates ▇▇▇▇
Instructions from FPGA Bootcamp #0
Open the simulator using this link and you'll see the three fundamental logic gates that will build up just about all kinds of logic. To the left are two logic inputs and each gate has its own output. Remember, you can click on the inputs to change from...

CAN BUS Gaming Simulator
Instructions from CAN BUS Gaming Simulator
Arduino Source Code://############################################################################################################## //Volkswagen CAN BUS Gaming //Test Sketch v3.0 //(C) by Leon Bataille 2015-2016 //Hackaday Project Page: https://hackaday.io/project/6288-volkswagen-can-bus-gaming...

Arduino motor controller (hardware)
Instructions from Eazy Peasy High Voltage Variable Capacitor
The controller is an Arduino Uno with an Arduino Motor Control Shield V2.3. (see photo) Two shaft encoders set speed and position. A pushbutton sets the zero position. A 16 character x 2 line LCD provides numeric feedback. The Motor Shield and motor...

Portable travel NAS
Instructions from Portable travel NAS
Let's get cracking, get the Carambola up and running. I like to connect to the serial terminal, the development board features a usb ftdi chip allowing me to use a terminal program like PuTTy to connect.Connecting to serial terminalFirst step: see that...

Low cost and open source bio-engineering kit
Instructions from Low cost and open source bio-engineering kit
Solder 22 AWG flexible stranded core wires (20 cm long) onto leads of DS18B20. Use heat-shrink tubing to insulate connections:

Luggable PC
Instructions from Luggable PC
Add locknut1 x 1/4"-20 nylon-insert locknut (McMaster-Carr 90640A129)

robotic_arm
Instructions from robotic_arm
⦁ Take the wooden piece C (9cm x 2 cm) and fix another servo motor using super glue at a distance of 20 mm from one side.

Featherjib
Instructions from Featherjib
Alternately, if you don't already have a tripod to disassemble, you might consider another option for mounting your camera to the Shur-Line pole. Home Depot also sells a Project Select Adjustable Pro Yoke Roller Frame, which expands to hold rollers between...

The NanoStillery™ - Whiskey Distillery
Instructions from The NanoStillery™ - Whiskey Distillery
Frame Parts:20 x 20 x 3 mm steel box section x 12mThe frame allows all the components to be mounted securely which is important for reliability and safety. Remember we have potentially explosive vapours and 240 volt electricity.

Arduino Code, by Jim Lindblom
Instructions from Arduino Joystick Mouse
/* HID Joystick Mouse Example by: Jim Lindblom date: 1/12/2012 license: MIT License - Feel free to use this code for any purpose. No restrictions. Just keep this license if you go on to use this code in your future endeavors! Reuse and share. This is...

Go to the site below to find the box shape that fit for our project.
Instructions from Tensegrity Cloud Lamp
https://www.festi.info/boxes.py/BasedBox Also we need to adjust the dimension according to what we need and laser cut it.

Creating your first Windows 3.11 application
Instructions from Modern tools for Windows 3.11 software development
This will be a Win32s application, which requires Win32s addon on the Windows 3.11 (already pre-installed in the emulator).You can follow the video tutorial (part 05:47-08:54), or follow written instructions.Open the IDE by clicking runCodeBlocks.bat....

Set up Ublox Base and Rover Devices
Instructions from Autonomous Agri-robot Control System
The base station remains static in one location and transmits a signal via a radio link to enable error correction for the Rover, as long as the radios are in range of each other. Ublox supply an excellent bit of software for showing satellite information...

|<
<
4
5
6
7
8
>
>|