1469 Results for "8-bit cpu"

Blues Generator
Instructions from Blues Generator
Listen to 8-bit blues!

Optional components
Instructions from USB Pedal based on Rpi Pico
3 pc step drill bit 3-20 mm + centerpunch8 Step drill bit 10-45 mm

Serial test
Instructions from OMEN Bravo
Start the serial terminal on your PC, select proper serial port and set the parameters to 19.200 Bd, 8 data bits, no parity, 1 stop bit.

Please consult Project Logs (above) for various aspects of this build/project
Instructions from Sym-1 A 6502 Phoenix!
How to upgrade the monitor functions and add a filing system to a retro 8 bit computer, the Sym-1, using a Mega2650+SD card

Adding AD7606 Module Arduino support in Visuino
Instructions from Adding AD7606 Module Arduino support in Visuino
The AD7606 Module has 3 modes of operation:16 bit parallel8 bit parallel and serialThis table shows the configuration options:As you can see, to use serial or 8 bit (Byte, 8080) mode, you need to connect the PAR/SER/BYTE SEL pin to +.The module has configuration...

Optional components
Instructions from WiFi controlled waterproof LED string
3 pc step drill bit 3-20 mm + centerpunch8 Step drill bit 10-45 mm

Spencer Nozzle
Instructions from Reusable Solid Rocket Engine Without a Lathe
The Spencer Mk. I Nozzle was created using a a 3/8 inch steel plug, found at Home Depot. A drill press was used, incrementally changing bit sizes to roughly match the desired nozzle contours. A conical sanding Dremel bit was then used to smooth out the...

Open Animatronics
Instructions from Open Animatronics
Install Java 8

Building The Box
Instructions from Spooky Halloween Noise Maker
This is actually the easiest step. I found an 8-track tape storage box at a local Goodwill for a few dollars. I bought a USB mic from MicroCenter Mall on sale for $16. I cut a hole for the mic with a doorknob hole cutting bit and also...

Adding AD7606 Module Arduino support in Visuino
Instructions from Adding AD7606 Module Arduino support in Visuino
Well... I seem to have the Module working in 16 bit parallel mode. Here is the new version of the component:Will try to make a Visuino release tomorrow morning, containing the new support, and will see to post some pictures of the running module.After...

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
BUILDING THE UPPER FRAMETools - Miter Saw, Jig Saw or Tin Snips, File, Drill with #30 drill bit,Rivet PullerA) Build the Jig for the Upper FrameTo properly build the frame, jigs are required to hold all of the frame elements in place. The jig is constructed...

Mount electronics
Instructions from Cat Detector - Useless Machine
I drilled 1/8" holes for screws in my enclosure, and then countersunk each hole with a larger drill bit so the head of the screw would be recessed. I used (5) M2.5 x 10mm standoffs and (10) M2.5 x 6mm screws to mount the Arduino Uno and the Microphone....

And we're done.
Instructions from Adding Buffering to LCSoft CY7C68013A Mini Board
I had considered routing the boards jumper through to a switch. I find that in one jumper position Sigrok thinks it's an 8-input board and in the other , a 16-input board. But this needs a bit more investigation to see if it's either true or useful (over...

CanSat - Exchangeable Payloads Arduino And Edison
Instructions from CanSat - Exchangeable Payloads Arduino And Edison
Step 8.- Integration And Testing.

Convert the WAVE files into embedded C code
Instructions from Speaker Games
You can use this nice free software WAVToCode to convert WAVE files into a C files. Check their help page for instructions on using the software. The DAC in this module accepts only 8 or 12 bit samples but this software generates 8, 16 and 24. Load each...

|<
<
4
5
6
7
8
>
>|