Close

27106 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워⒬ 쓰리아워pillowШ쓰리아워가격강남술집정보쓰리아워가격mild 강남쓰리아워∂강남술집정보∵㎃쓰리아워poor"

  • DESIGN
  • Instructions     from Over Engineered XBOX Controller Stand
  • Our initial task was to design this project, which was made possible by a 3D model of the Xbox Controller. The controller would be held up by its two handles on a base that would house an RGB driver PCB, according to my design. In order to create the...

  • CIRCUIT
  • Instructions     from Over Engineered XBOX Controller Stand
  • The circuit that followed was made up primarily of 15 WS2812 RGB LEDs linked to an XIAO microcontroller. We have integrated the IP5306 IC Setup, a power management integrated circuit that is frequently used in power bank applications. In these applications,...

  • Seeed Fusion Service
  • Instructions     from Over Engineered XBOX Controller Stand
  • After finalizing the PCB and generating its Gerber data, I sent it to SEEED Studio for samples. The PCB was ordered in a white solder mask with black silkscreen. PCBs were received in a week, and their quality was super good considering the rate, which...

  • PCB Assembly Process
  • Instructions     from Over Engineered XBOX Controller Stand
  • Using a solder paste dispensing needle, we first add solder paste to each component pad individually to begin the PCB assembly process. In this instance, we are using standard 37/63 solder paste.Next, we pick and place all the SMD components in their...

  • TESTING PROCESS
  • Instructions     from Over Engineered XBOX Controller Stand
  • Following PCB assembly, we connected the JST wire of the lithium cell to the JST connector on the circuit board and then connected the JST wire of the switch to the JST connector on the circuit board.To confirm if the power management system is functioning,...

  • CODE
  • Instructions     from Over Engineered XBOX Controller Stand
  • #define FASTLED_ALLOW_INTERRUPTS 0 #include FASTLED_USING_NAMESPACE #define DATA_PIN D0 #define NUM_LEDS 15 #define MAX_POWER_MILLIAMPS 500 #define LED_TYPE WS2812B #define COLOR_ORDER GRB //////////////////////////////////////////////////////////////////////////...

  • Main Assembly
  • Instructions     from Over Engineered XBOX Controller Stand
  • First, we inserted two M3 screw inserts into the rear side of the main body to begin the major assembly procedure.Next, we used four M2 screws to attach the center portion of the main body to the upper part.After that, we positioned the switch on top...

  • RESULT
  • Instructions     from Over Engineered XBOX Controller Stand
  • After the tedious build, here's the result so far. The best thing is that we used the same surface offset as the controller's handle, so it fits precisely in the holder and keeps the controller from falling out of place. This gives the Xbox controller...

  • post_sensor.php
  • Instructions     from Industry 4.0: An economical SAAS MES part 1
  • Note: The code is intended to be instructional, and the examples provided will be commented on in as much detail as possible. Your feedback is welcome. Lean-C IOT remains an evolving software solution with much room for improvement!
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday