Close

27106 Results for "㈁ 휴대폰포커게임사이트 ㉶ rfa609.top ㆄ RHTMXHQRPDLA ㅹ 모바일홀덤사이트 ㉧ 사행게임 ㈓ 메이져포커 ㈓ 홀덤동호인 ㅆ 갤럭시바둑이㉺ 대전맞고"

  • BASIC SETUP

  • Setting up a basic breadboard version of the project, which consists of three push buttons connected to one 1K resistor each between VCC and GND, is the first phase or level. When the button is pressed, a value is obtained at the GPIO Pins, which is...
  • LEVEL 2

  • We used a 55 x 35 mm prototype board for Level 2 of this project and added three push buttons to it: two 6 x 6 mm push buttons for up and down, and one 12 x 12 mm push button for fire.Next we added Three 1K Resistor with each push button.The resistor...
  • POWER SOURCE

  • We attached a 3.7V LiPo Cell via the JST connector on the expansion board after soldering the Switch PCB and the expansion board together. Our little 100mAh 3.7V Li-Po cell provides 0.37Wh of power, which is more than enough for this tiny portable setup....
  • ASSEMBLY PROCESS

  • In order to complete the build, we connected the JST connector of the LiPo cell into the expansion board first, and then we placed the LiPo cell into the 3D printed base.Next, we position the switch PCB and expansion board on the expansion board in their...
  • RESULT

  • Here's the result of this small build- a completely functional portable game console, loaded with the classic space trash game from old Nokia phones. The ESP32C3 chip is the reason that this setup functions flawlessly. Although the code is somewhat lengthy,...
  • Hardcoded Settings in main.cpp / Installation

  • On first the Code Checks if Settings Uploaded as config.json in Spiffs Image, then starts first as Access Point (Captive Portal) to set these Settings if Settings not available at Boot. Other Hand there are Five Settings they are hardcoded: NTP Server...