4801 Results for "%s"

Connect the other reed switch terminal to the ESP-32's ground
Instructions from Quick n' Dirty Freezer Door Alarm

For full instructions, please visit: https://s-u-pm-sensor.gitbook.io/pyonair/
Instructions from PyonAir - IoT air pollution monitor
To avoid confusion, the following instructions will only cover the steps for making a PyonAir monitor using the PCBA approach. If you'd like to hand-solder the PCB or use breadboard, please visit: https://s-u-pm-sensor.gitbook.io/pyonair/tutorial/wiring/...

Thiiiiiiiing
Instructions from Thiiiiiiiing
That's it!

Meteorite Containment
Instructions from Meteorite Containment
Print stl's

Mind Controlled Robot
Instructions from Mind Controlled Robot
Connect the dongle’s GND to Arduino’s GND

Blackintosh
Instructions from Blackintosh
Paint, decoration, that's all.

ESPCLOCK
Instructions from ESPCLOCK
That's it! All done!

Enjoy
Instructions from Control a bunch of 7 segment displays
yup, that's it :)

xmas id badge (flair)
Instructions from xmas id badge (flair)
add led's to front side

Hoverboard Digital LED Lighting
Instructions from Hoverboard Digital LED Lighting
Solder two wires to Arduino's 5V in and GND and solder other ends to balance scooter's sensor board's free pads (any two free pads that give you voltage of 5V and GND)

Step 2:
Instructions from A 'smart' controller for a powered chair or bed
Plug your chair's MALE 5-pin DIN connector that you just unplugged into this device's "Main Controller" jack

RetroBerry: a Raspberry Pi 2 Portable
Instructions from RetroBerry: a Raspberry Pi 2 Portable
Drill holes in the perfboard and solder the tact switches/analog stick(s).

Telescope Controller
Instructions from Telescope Controller
I have couple of PCB's to share.

Lego Optics Lab: Polariscope
Instructions from Lego Optics Lab: Polariscope
Here’s how I built the polariscope for my Lego optics lab:

|<
<
1
2
3
4
5
>
>|