Close

207 Results for "%E3%80%8A %EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98 OIO%E2%86%978489%E2%86%978306%E3%80%8B%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%8F%8A%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4mystery%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%CE%A7%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8briefly %EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%84%B7%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%94%90%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%E3%88%8B%E2%92%B4%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4modification"

  • Checking to start
  • Instructions     from Pulse sensor to actuate a Robotic Hand
  • First check the you have necessary materials to make the project. You need some 3D printed parts, so a printer is necessary or at least the posibility of print. We print with protopasta carbon fiber filament but you can print in PLA, thats if you want...

  • Step 3
  • Instructions     from ESP32-Driven Bluetooth Image & GIF Display
  • Add ESP32 board Open the Arduino IDE.Go to File> Preferences.In the “Additional Boards Manager” URLs field, add the following URL: ‘https://dl.espressif.com/dl/package_esp32_index.json’.Click OK.

  • Code for single Esp32 Board
  • Instructions     from Bluetooth Tracker
  • This is the code for everything on a single Esp32 Board. Since I didn't have the correct board, I needed to use two of them, and they communicate through the serial port.The Bluetooth packets address and raw data get printed to the Arduino Serial...

  • AIRee Pollution Clock
  • Instructions     from AIRee
  • #include #ifdef __AVR__ #include #endif // Which pin on the Arduino is connected to the NeoPixels? // On a Trinket or Gemma we suggest changing this to 1 #define PIN 6 // How many NeoPixels are attached to the Arduino? #define NUMPIXELS 48 // How much...

  • WiFi ePaper
  • Instructions     from WiFi ePaper
  • Flash a NodeMCU firmware imageFor flashing a new image, I use esptool. Plugin your NodeMCU module to an USB port, clone the esptool project and flash your firmware. Usually a new device will appear, like /dev/ttyUSB0. Step by step:git clone https://github.com/themadinventor/esptool.git...

  • Firmware upload overview
  • Instructions     from Pedalino™
  • Pedalino is using 2 boards and 3 microcontrollers. All of them need to be flashed with the right firmware before using Pedalino. ModelBoardMicrocontrollerFirmwareInstructions BothArduino Mega 2560ATmega2560ATmega16U2PedalinoMocoLUFAClick hereClick here and hereAESP-01S...

  • Lighting Design
  • Instructions     from Long Range RFID Controlled Dry Cleaner
  • We had to do lots of experimenting with different types of glow powders and different types of lighting.LightsFor the best "pop" highlighting the fine details of your leaves, you want a really low wavelength (below 400nm, like 390nm). This reduces the...

  • Configure LoRa device
  • Instructions     from Soil moisture sensor with LoRa
  • In HTerm or any other terminal program you see the start of the module after plugging the power supply jumper.Now you can configure the SMT100 by entering the password in HTerm (123456) and then send AT commands (Attention: Always capitalize commands...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday