Step 10 - Figure out breakout schema for IO pins and the various IO ports from the FPGA (i.e. the connections that will enable the FPGA to interact with the world...ex: 'perfboard'-style area, headers, etc.
Labview and Arduino IntroductionLabVIEW (short for Laboratory Virtual Instrument Engineering Workbench) is a system-design platform and development environment for a visual programming language from National Instruments.To learn about LabView check official...
MSP430G2231 Code:For a starting point I used this excellent project from Stefan Wendler. MSP430G2231 Software UART. The code below replaces main.c from his “timer-a-uart” branch.#include #include #include "uart.h" #define BUTTON BIT3 //...
Yate(Yet Another Telephony Engine):Answering Google Voice calls that are forwarded to Google chat is tricky if you don't want to use the Gmail chat application. I found the most functional results were achieved by using Yate, to create an SIP server...
Linphonec and Linphonecsh:This is the softphone I used to interact with the python program. It is a little particular to get working so here are some directions. First run linphonec once to create a .linphonerc configuration file in your home folder....
Take off the faceplate, remove all the batteries (especially the backup coin cell), unscrew the case, and pry it open. You're going to need a torx screwdriver for the case screws. Theres also clips holding the case together. Don't be too worried if you...
As you can see in the picture, the screen is glued onto the PCB with a thick piece of aluminium between them. Now we have to remove the LCD screen and plate from the motherboard. This is tricky. You must be extremely careful, because the LCD is made...
Now is a good time to cut your EL panel down to size. Lay the LCD on top of it and trace around it with a marker. I chose to have the leads going out the right side (facing the front of the screen). You can cut the EL panel with scissors. You might want...