TOOLS Cutter Knife COMPONENTS Velcro Tape self-adhesive with hook tape 87 x 26mm 1.25mm thickVelcro Tape self-adhesive with loop tape 85 x 26mm 1.25mm thickAnker Power Core 10000 PD Redux (Power Bank) Cut the Velcro hook tape and put it to the board....
Thanks for reading my tutorial and watching the video. I hope you liked them and that they would be useful in some way! Do not forget to like and share this project with your friends. Your support is very important! :D If you still don't follow my tutorials,...
Mounting resistors and panelIf you have the second 85 mm square sheet cut as well place it in the middle of the bigger cut sheet. You can temporarily use tape to stick them together and make sure they fit into the printer together. If they don't check...
Now it sits. Leave it alone, undisturbed and out of direct sunlight. Make sure it is sitting in a place that is between 68° and 85.° After 7-30 days it will be ready. The amount of time required depends on the type of taste you prefer. Younger...
The Condensor Parts:5912-QG030-353/12, MFG Part No:QG030-353/12, ebm-papst Blowers, TARIC:8414592090 ECCN:EAR99 COO:HU3/8 radiator tube with 15/16" discs.Normally, the condenser would be made with water cooling, but I did not want the hassle of having...
Picking a value for a suitable carbon intensity to operate the switch is system dependent. As I have suggestedd I have a modern boiler that is probably about 85% efficient. A range of values for the amount of carbon dioxide equivalent releases...
Here are a few more-or-less random notes about 3D printing the calculator enclosure. I've printed it with the Creality Ender 3 V2 printer using PETG plastic, and the case went really well I think. Contrary to what's written in many websites,...
Here's the result of this small build- a completely functional portable game console, loaded with the classic space trash game from old Nokia phones. The ESP32C3 chip is the reason that this setup functions flawlessly. Although the code is somewhat lengthy,...
Sizing Your Solar Power SystemOne of the first things that comes up in a solar powered design is how to design the power system. The three main questions to be asked and answered are:How much power do I need? How many solar panels do I need? What size...
I put a lot of effort into this project, to make it as clear and educational as possible. If you liked it, please don't forget to 'like' and 'share' it. Your support is very important for me! :D If you still don't follow my tutorials, take a look at...
I put a lot of effort into this project, to make it as clear and educational as possible. If you liked it, please don't forget to 'like' and 'share' it. Your support is very important for me! :D If you still don't follow my tutorials, take a look at...
Construction of the Anode and Cathode:This material is Copper 85% and Silver 15%. SILFOS.Here I have formed the Silfos around a pex barb fitting to achive this profile.I clamped the end of the Silfos to the pex fitting with needle nose vice grips and...
Some stoves come with temperature control, but mine didn't. There are dedicated sauna control panels with a timer and temperature control, but they cost upwards of £95. It should be possible to cobble one up myself for less.So I bought this from...
Open Arduino IDE, (1)Board: ATtiny25/45/85 (2)Processor: ATtiny85 (3)Clock: Internal 1 MHz (4)Port: COMXX(Arduino Uno) (5)Programmer: Arduino as ISP Upload the below given code: /* Fading LED with ATtiny85 The analogWrite() function uses PWM, so if you...