27106 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워가격↑ 쓰리아워done강남쓰리아워Ь쓰리아워레깅스룸singular 강남술집정보╊쓰리아워레깅스룸й강남쓰리아워ワチ강남술집정보innocence"

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Add a wood backer strip with a couple of dry wall screws, a 1x2 or a paint stirring stick will work.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Test fit the depth once placed in the wall. Depending on your wallboard thickness it should sit just below the surface of the wall so you can use drywall compound (mud) to cover it.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Guide the cable so it doesn't get pinched and secure the Dock Stand to the wood backer. I used zip ties since I didn't want to damage the Touchstone Dock.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Now add a backer piece of wood above the Dock so you can screw the magnets to the wall securely. Notice I started mudding it in before I realized I missed this step.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Screw the wood backer in with some drywall screws, and then hollow out a shallow void for the neodymium magnets to fit into.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Screw two neodymium magnets to the backer wood, making sure to keep them just below the surface of the wall.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
I added some drywall mesh tape just where the magnets were just in case they might cause drywall cracking if the force was strong enough. Then start to spread drywall compound (mud) evenly over the surface pushing it into the cracks.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Spread it smooth so you won't have to do a lot of sanding later, but you may have to sand and do another thin finish coat.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Sand it smooth and feather the edges.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Test it with the HP Touchpad to see if it charges through the thickness of mud. IT DOES!

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
If you walls are textured, you'll need to texture the wall to match. If you have a special texture (other than spray like mine) you might practice on a scrap board as you want this to match seamlessly.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Once you have the texture matched, you'll paint the wall to match. I made sure to sand the lip where the Touchpad rests smooth, almost to the painters tape underneath since I wanted to Touchpad to fit as it it were on my desk.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Now to add some thin metal strips to the back of the HP Touchpad. I just used some black painted metal plates I had and some 3M Double sided tape. Bend the metal to follow the curve of the Touchpad's back.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Add some double-sided tape, butting edges to keep it smooth/flat.

HP Touchpad Charging Wall Mount
Instructions from HP Touchpad Charging Wall Mount
Stick the metal plate to the back, one plate for landscape and one for portrait, since the Touchstone supports charging in either orientation. Since my plates were already painted, I didn't want to cut them so they fit perfectly. This looked fine for...

|<
<
4
5
6
7
8
>
>|