27106 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

Halo 4 Helmet ( Size A, B, C )
Instructions from Halo 4 Helmet ( Size A, B, C )
Step 1 test - these instructions are to test layout / intent of hackaday projects.

Halo 4 Helmet ( Size A, B, C )
Instructions from Halo 4 Helmet ( Size A, B, C )
step 2 test

Halo 4 Helmet ( Size A, B, C )
Instructions from Halo 4 Helmet ( Size A, B, C )
Step 3 test

Halo 4 Helmet ( Size A, B, C )
Instructions from Halo 4 Helmet ( Size A, B, C )
Step 4 test

CUBEX
Instructions from CUBEX
Download and build board files: https://github.com/arkorobotics/CUBEX_V1/tree/master/Board

CUBEX
Instructions from CUBEX
Order CUBEX BOM: https://github.com/arkorobotics/CUBEX_V1/blob/master/Board/BOM.xlsx

CUBEX
Instructions from CUBEX
Assemble the CUBEX Motherboard, MCU first, test by reading device ID using the ICSP port, then assemble the rest.

CUBEX
Instructions from CUBEX
Assemble the CUBEX Camera, Radio, and Solar Cell board.

CUBEX
Instructions from CUBEX
Powering the Motherboard, Camera, and Radio board using a power supply set to 3.3v, upload the code available at: https://github.com/arkorobotics/CUBEX_V1/tree/master/Code

CUBEX
Instructions from CUBEX
Plug in a USB-RTL (or any sdr device) to your computer, tune (using the sdr-sharp) to 434.460Mhz USB and wait for SSDV/RTTY signal.

CUBEX
Instructions from CUBEX
Decode the SSDV/RTTY data using the DL-FLDIGI HAB Mode software: http://ukhas.org.uk/projects:dl-fldigi

CUBEX
Instructions from CUBEX
Finally, assemble CUBEX Power Board, LTC3536 section first, connect a power supply (set to 4.2v) to the battery input and measure the LTC3536 (buck-boost) output to assure the output is 3.3v. Then solder on the LTC3105 (solar charger) and solar cells...

Smart Solder reflow oven
Instructions from Smart Solder reflow oven
First thing to do is create simple heater controller. My idea is to use PWM signal what will turn on/of heating element, and because PWM is running more than 1kHz, i can get very fine power control. Here is original circuit:Idea very simple. First i...

FPGA development board
Instructions from FPGA development board
Board schematic is located at https://github.com/OH1TR/oh1tr-fpga-devboardI also have some code writen to this and it will be added soon.

Bench power supply
Instructions from Bench power supply
1) Come up with a simple good idea.2) Add good ideas to it.3) Try to implement it.4) When it fails, start to strip down the design to try to get it to work.5) Strip it down more6) More...7) Rejoyce when something simple works8) Add a few simple things...

|<
<
7
8
9
10
11
>
>|