Close

27106 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

  • CUBEX
  • Instructions     from CUBEX
  • Download and build board files: https://github.com/arkorobotics/CUBEX_V1/tree/master/Board

  • CUBEX
  • Instructions     from CUBEX
  • Order CUBEX BOM: https://github.com/arkorobotics/CUBEX_V1/blob/master/Board/BOM.xlsx

  • CUBEX
  • Instructions     from CUBEX
  • Assemble the CUBEX Motherboard, MCU first, test by reading device ID using the ICSP port, then assemble the rest.

  • CUBEX
  • Instructions     from CUBEX
  • Assemble the CUBEX Camera, Radio, and Solar Cell board.

  • CUBEX
  • Instructions     from CUBEX
  • Powering the Motherboard, Camera, and Radio board using a power supply set to 3.3v, upload the code available at: https://github.com/arkorobotics/CUBEX_V1/tree/master/Code

  • CUBEX
  • Instructions     from CUBEX
  • Plug in a USB-RTL (or any sdr device) to your computer, tune (using the sdr-sharp) to 434.460Mhz USB and wait for SSDV/RTTY signal.

  • CUBEX
  • Instructions     from CUBEX
  • Decode the SSDV/RTTY data using the DL-FLDIGI HAB Mode software: http://ukhas.org.uk/projects:dl-fldigi

  • CUBEX
  • Instructions     from CUBEX
  • Finally, assemble CUBEX Power Board, LTC3536 section first, connect a power supply (set to 4.2v) to the battery input and measure the LTC3536 (buck-boost) output to assure the output is 3.3v. Then solder on the LTC3105 (solar charger) and solar cells...

  • Smart Solder reflow oven
  • Instructions     from Smart Solder reflow oven
  • First thing to do is create simple heater controller. My idea is to use PWM signal what will turn on/of heating element, and because PWM is running more than 1kHz, i can get very fine power control. Here is original circuit:Idea very simple. First i...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday