205 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

First testing: Mistake happens
Log from WDR-1-Bit-Computer
Or how one should never trust existing footprint libraries without double and triple checking everything!This morning I decided to finally test the Computer with all cards inserted and... no clock! Not only did I swapped X1 and X2 on the CPU board, which...

almost finished a lot of stuff
Log from Ultra-Portable Sustainable Electric Generator
I put together the solar panel (minus the coatings and flexible backing. Around mid-day it gave 20V at first and then 19V after heating up in the sun, and it charged the lead acid battery pretty quickly. I redundantly wired all 10 cells in series, using...

Brief Update, Added UART Framebuffer Code
Log from VGA Graphics Over SPI and Serial - VGATonic
Due to a well timed suggestion from @antti.lukats in chat, I went through and made the licenses more explicit today. Basically everything is MIT licensed, except code which derives (or is used in) the Linux Kernel - all of that is, of course, GPL v2.I'm...

3D Printed Sails
Log from Ladon Project
Code for the big boat has been taking up most of my time, but in the mean time I've still been working on the sails for the little boat. The original sail design didn't work -- I couldn't get enough weight on to balance it against the overly long lever...

Solar Shopping List
Log from Solar-Hydro
After digging through my collection of scrap building materials, I've revised my plan for mounting four concentrators in a box together down to three. It turns out that I've got at least twelve 2.4m (8') lengths of 4x2" pine, but only one length that's...

Electronics Update.
Log from Over-powered, Over-priced Electric Longboard
Pre-cursor: I don't know electronics very well. It blew my mind a couple years ago when I kind of learned how microcontrollers work. I'm learning all of this as I do it. It's one of the reasons I wanted to do this project. I'm still in the "connect a...

r5B12 boards assembled
Log from DIY programmable (SCPI) bench power supply
The new r5B12 PCBs arrived from ITEAD few days ago and I managed to assemble them to test if new added features are working as expected. All boards are now a little bit larger and I tried to keep the same mounting holes spacing as in previous builds.AUX...

KCP53010 Pipeline Register Bypass Works
Log from Kestrel Computer Project
I just finished register bypass logic for the KCP53010 core. This allows execute and memory pipeline stages to feed their destination register contents back to the decode stage before register write-back actually completes, preventing a pipeline...

VLSI tech support rocks x2
Log from NTSC/PAL Video Display Shield
The folks at VLSI tech support are great. [Panu] and [Kalle] are a big help with HW and SW. They even sent a full Arduino sketch to configure the VS23S010. It does configure the chip corretlyf̶o̶r̶ M̶C̶G̶A̶ 3̶2̶0̶x̶2̶0̶0̶ w̶h̶i̶c̶h̶ u̶n̶f̶o̶r̶t̶u̶n̶a̶t̶e̶l̶y̶...

Introducing SolPak for the Energy Harvesting Challenge!!
Log from SolPak
SolPak is a rechargeable portable battery pack that can be charged via solar panels or AC mains voltage. The pack uses 18650 lithium ion cells and will be using the ADI LTC6813HLWE-1#3ZZPBF battery balancer/monitor chip suspected to be used by Tesla...

Let the development commence
Log from Tomodachi X2
Over the past weeks/months/too much time, I have been primarily occupying myself with the details of the "Alice" chipset, as this is the magic sauce that will make Tomodachi X2 either awesome or not so cool. Details such as how to switch between system...

3 Transistor Latch -> 7 Transistor DFF
Log from VHDL/Verilog to Discrete Logic Flow
One issue of the logic style I am using currently is that a D-Flipflop takes up no less than 15 units cells, 15 transistors, 30 resistors. This has a huge impact on design size and it would be great to do something about it.Months ago, I had a nice discussion...

Reverse Disassembly
Log from Tron:Legacy themed Arcade
I didn't have much time to document the process as we were assembling, nor did an incredible website such as hackaday.io exist at the time of construction. I'd still like to show off how we put these together, so these are actually photos taken during...

Mechanical Details
Log from Seismometer
This log contains the details of the mechanical stuff -- the dimensions and materials. I will attempt to generate a concise description of how to build the seismometer in the Instructions section. I believe these drawings are accurate. Sorry for the...

Assembly compiler and memory loader
Log from Nits Processor
Two new pieces were added to the system :A simple software to compile the assembly code into binaryAn arduino based RAM loaderIndeed since the beginning of the project I had to manually write the binary code and upload it using dip switches and this...

1
2
3
4
5
>
>|