Close

3504 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • It is getting there!
  • Log     from Obsolete Time
  • We are done with designing, just about to order the boards to be manufactured!A few "features" and design choices have been added or altered. We chose to go back the popular Arduino platform, not because MSP430 is hard, but more because the code is already...

  • Frame Completed
  • Log     from Matrix Operator's Console
  • 04.21.2014 (Kittan)Well the frame is pretty much complete. I might still add some bracing, and at some point do something better with the base than the 1x4 screwed in there to keep it from racking, but it's functionally complete. We've got all 12 screens...

  • Print Surveillance......?
  • Log     from RosBot Kossel
  • I have been toying with the idea of integrating a camera into the RosBot design to allow you to be able to check in on a long print from anywhere with an internet connection. At the moment I am using an Arduino and the RAMPS board for my printers control...

  • Picking up work
  • Log     from Super 8 digitizer
  • So, first thing to do is to put some pressure on this thing. I want to have the first digitized reel by September 1st.The recent arrival of my own 3D printer makes me want to pick up this partially shelved project again.I was always worried about the...

  • Floor Construction
  • Log     from Interactive Disco Dance Floor
  • The floor structure team met last Monday and we spent a few hours hashing out the final design ideas so we can spend the upcoming weekend building the first full-scale prototype!!!Here's what we came up with. The floor will still be made up of several...

  • Getting Started
  • Log     from Smart Hydroponic GreenHouse
  • ok, so I managed to get going with my project this weekend. I'm starting with the physical aspect of the build. Building a frame that will hold everything and become the 'GreenHouse'. I started putting together a frame using acrylic and openbeam. I like...

  • The Main Hardware
  • Log     from Propeller Based CNC Router Controller
  • I took a couple of photos of the CNC frame.Besides the electronics I earlier photographed, there are also some other parts in shown in the above photos. These include the router mount, stepper motors and other miscellaneous parts.I'm using the third...

  • Getting Closer
  • Log     from Secret Project
  • There is an aluminum frame of the device:I made it during the weekend. It is almost finished. The only thing is missing from the frame the two L shaped piece, what I'll use the mount it.I also made some supports for the optical endstops:The other things...

  • Brackets 'n' Beams
  • Log     from ED-64: A discrete 8-bit computer
  • I have opted to mount the electronics in a frame constructed from Openbeam extrusions. The extrusions themselves are from Makershop here in NZ. The frame will consist of 7 facets fixed in a semicircular arrangement. Each facet will hold vertically 3...

  • Initial Status
  • Log     from Chiindii
  • Although we have just now started this project page, we have been working on this project for close to 6 months now. The panelized design took a long time to figure out (even the requirements for what we wanted to include and how the frame was to go...

  • Foto update (nov 2018)
  • Log     from Relay Logic Clock
  • The last PCB, fresh off the mill. This is the lower decoder board. It replaces the two separate decoders I made earlier, because I had to add extra circuitry for the carry logic. Here it is after soldering. Those diodes are a real challenge to do consistently....

  • Everything except the bed...
  • Log     from Printrbot 'SuperSize Me" Mod
  • I have acquired most of the bits I need to dig in to this project. To really get going, I need to begin the dis-assembly. I am a little apprehensive to dig in as I do not have a back up printer for printing the bits that will invariably come up... So...

  • Optimisation
  • Log     from BIG_CLOCK
  • I spend some time to lower the overall power consumption in order the clock could run on batteries. I'm sure there is still rooms for improvements. The CPU is on sleep, and only the second 32.768Khz oscillator is running for RTC and LCD driving. All...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday