4829 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

Update: Put everything in the Box
Log from CarbOnBal
Update: put everything in the box

Arcade button came in
Log from The Diet Coke Button
Arcade button arrived and got it mounted on the box. Now to get everything wired together

Initial Checkout
Log from Intel SDK-85 Enhancements
What Is It?The Intel SDK-85 is a single board computer trainer from Intel. It is very similar to the MOS (later Commodore) KIM-1 in that it features a keypad and 7 segment display. 2K of ROM and 256 bytes of RAM are provided...

Box Enclosure Made
Log from PLC controlled Traffic Light
I have made a box to keep everything together and for it look clean. I had the lights from a trailer we were going to make.

Making the box
Log from Switch Testing Box
Acrylic Weld was used to attach everything. Next time I need to account for the kerf on the laser I used so things fit together a little more snugly.

Completion!
Log from AtarPi
Everything finally works, I got games loaded up, and it's all nicely fit together. The onl;y real change I did was use a dremel to cut out the built in battery box (since I wasn't using it). This allowed me to squash everything in and make sure it all...

Hack Chat Transcript, Part 2
Log from PCB Thermal Design Hack Chat
Mike Jouppi12:55 PM Mike Jouppi12:55 PMOk, here is the board stack up Sven F12:55 PMOK, thank you very much. Your links are already helping me! Do you know any surface mountabe heatsinks manufacturers, too? So far I used some BGA-heat sinks and mounted...

Progress on the Outdoor enclosure.
Log from SAM - Solar Automation Machine.
Toying around with getting everything to fit in the box, found some wire from an also satellite receiver to connect the relay board. Just a bunch of tired rambling in this one, but it's coming together.

The Box is working - time to finish it!
Log from UV Exposure Unit
The Exposure Unit is working as intended! New Case and a clean PCB for the electronics and it's finished. Once everything is finished, I will release all files.

Nearly There
Log from Raspberry Pi Jazz Radio
This project has had way more setbacks then i ever thought were possible. For the last week or two I've been trying to work with the pi to control the audio on the speakers. Unfortunately the player i'm using (omxplayer) doesn't support volume control...

9th week
Log from Braille Clock/Watch
9th week : LAST WEEKHOPEFULLY WE FINALLY MAKE THE CODE WORK ! IT WORKS GUYS!!!Now, we just have to fix everything in the box and organize it so it doesn't move and to have something solid that won't break just by taking it in your hands.

Breadboard!
Log from +/- 10V to 0-3.3V Translator
Built A breadboard version of the circuit. Checked out the linear supply and the switched capacitor supply. Haven't had a chance yet to try the op-amp section. Eventually plan to move everything to protoboard and a project box if the breadboard version...

Temporary Plunger
Log from Pinball Lab
We're planning to build a plunger and mount it in a box. Already bought a brushed nickel football-shaped knob and everything. For now, though, the ol' spring-loaded solder sucker works a treat!

Nextion Display enclosure part update
Log from Digital Bird Motorized Dual Action Camera Slider
Top box for Nextion display has been made 2mm deeper to allow more room for cables. I found when assembling the remote that it was difficult to get everything in without putting pressure on the back of the display which can stop the touch from working...

1
2
3
4
5
>
>|