6141 Results for "3D printing"

3D-printing has started
Log from SATRAN - Satellite Tracking Antenna
Nothing beats the little 3D-printer when prototyping. I have a Creality Ender-3 that recently replaced my older TronXY, and I absolutely love it!Three parts have been printed so far, the rest still being designed. The first parts make up the turntable,...

3D Files
Log from The Compost Professor - A Smart Composting System
October 19, 2017I printed my early prototypes, cases, etc on my home 3D printer (a Monoprice Maker Select Plus, which I highly recommend). I used a 3D printing service for my final prototype prints. Pictures below. STL files on thingiverse - https://www.thingiverse.com/thing:2586719...

CAD and 3D printing done
Log from OpenEyes
[files available at https://github.com/cristidragomir97/openeyes_cad]

First 3d print almost complete!
Log from Hackaday Superconference 2019 Badge Enclosure
Just need the cartridge door and actually transparent versions of all of the light pipes. Printing now...

3D Printing and Painting Parts
Log from CheerUp
https://www.thingiverse.com/thing:4939545

3D printing the shell
Log from Powerful Portable Speaker
For this project, I commited pretty much any crime in design for 3D-printing. No flats, lots of overhangs, thin shell (2mm). So the only way I could print this without excessive use of support structures was cutting the design into pieces that could...

More 3D-printing
Log from Ardumower Arctic Hare X2
Front nose 1/2 just finished! Right side is almost completed.Body assembly Body on chassischarging pin

3D Print
Log from Team TAHMO
As this is a very first attempt at 3D printing, the results are quite nice. We used a Da Vinci Junior 1.0A that uses PLA for its prints. The first time, the two halves of the box fitted nicely, as did all the 'innards' of the box. Some minor modifications...

3D Modelling
Log from SnapBot
Next step is to model the entire robot to leave out any obvious mistakes. Sketchup is my preferred software for 3d modelling as it is simple to use and the availability of many pre-modelled components. The SketchUp file for the model is part of the files....

3D printing
Log from SnapBot
The first step was to calibrate the 3d print, magnet and motor. Based on this test a few changes were done and the final model is attached. So next is sticking the magnets to this using some cyanoacrylate glue and giving it a quick spin.

3D Printing of the arms pt.2
Log from Robô da Alegria ("Joy Robot")
The second part of the left robot arm was printed in 3D using PLA with low density and spacing of 0.3mm between layers in a total printing time of about three hours.A segunda peça do braço esquerdo do robô foi impressa em 3D utilizando...

3D Printing
Log from Call Button
Just wrapped up an initial print for the case.Aside from a few cutouts internally, I didn't end up needing to do much fettling to get things to fit. Next up - wiring up the 2nd unit and blocking in the actual interaction sequence.

3D printing
Log from Earth Explorer in a small parcel
I have printed the base components of the first Earth Explorer prototype:It took 36h to manufacture the parts needed to get a rolling chassis. Things like a battery box, mounts for the driver boards, the Raspberry Pi or the camera are still missing,...

3D Thrusters and mounts
Log from BorgCube ROV
Once you have a 3D printer, every problem looks like something you can fix with a 3D printer. After printing some new thrusters, I've also updated the tube mounts with some custom 3D printed pieces.In the photo you can see them in blue (some of the new...

3D Printing
Log from Tobi-P, the rabbit robot
All the 3D printing details can be found on the dedicated Thingiverse page. The slicer software is the latest PrusaSlicer (2.3 at the time of writing), combined with the latest firmware for the MK3 (3.9). And now that all the parts have been printed,...

|<
<
1
2
3
4
5
>
>|