52581 Results for "《 예약문의 OIO↗8489↗8306》선릉가라오케や가라오케추천received가라오케가라오케가라오케사이즈scarcely 청담가라오케иª가라오케사이즈glowing"

Day 2 (part 1) - Fabric, Access, Workshop and LEDs!
Log from Cultural Integrity (at the Dethrone Hackathon)
The big hacker day was upon us and the gears were in motion! Julia jumped into action during morning solo hacker time. She went to the Mission Fabric Outlet store to find our throne-worthy textiles, as well as coordinating with a participant...

Day 2 (part 2) Rap Music & "Shopping"
Log from Cultural Integrity (at the Dethrone Hackathon)
Julia and I rushed over to TAP plastics, hoping to get our acrylic sheet before closing. On the car ride over, I opened my CD case and asked Julia, "is there any music thatyou'd like to hear?" "You just have old people music, right?'" she said. She wasn't...

Day 2 (part 3): Spray Cans, Ultrasonics, and Mischief
Log from Cultural Integrity (at the Dethrone Hackathon)
Once we got back to my apartment, the fatigue began to set in. It had been a long day already, with nonstop running around. I asked Julia if she could wait for a few minutes while I rested. She was totally understanding and didn't give me...

What have I got?
Log from Interak Computer Restoration
The first step, after wiping-off the accumulated grime and surface corrosion, was to assess what I have. Within the very large - and very heavy! - case were four cards - an MZB-3 CPU card, a VDU-2K (composite video only) 'graphics' card, an FDC-1 Floppy...

It lives!
Log from Interak Computer Restoration
As I randomly slid cards in and out, trying various combinations, I suddenly noticed something. The random characters on screen didn't look so random! More in-and-out card-swapping, trying them in different slots, and power-cycles... hey, those aren't...

Project Log 1: Project Start
Log from Magneto-Flex
I got this idea based off of a research paper a friend showed me and decided to go full prototyping mode with it!So let's say we have two tapes right, E is our tape with magnets on it, which is slightly longer than D (which has hall sensors). They are...

Initial Design
Log from BWLC1A: Yet Another ESP32 Asset Tracker
Initially, I roughly design the device to meet the following points: Slim and smallCellular connectivityGNSS -based location trackingLow-costBattery-powered and Rechargeable Working on the schematics, I was able to achieves those points and choses...

Ego satisfaction... again (not built yet)
Log from ML Clip Cam
So this project is much simpler than the previous ML Hat Cam where it was this massive thing with steppers. The zoomable voice command feature was really neat and it had a control loop to autofocus using laplace variance.(Nickelback: look at this piece...

I must fly...
Log from ML Clip Cam
In 5 daysThis is a distraction from writing the Pelicam software but days off and nice weather, have to flyI'm going to at the very least build a crude 1 day thing that functionsIt is pretty much just a battery-powered rpi cam... but it will be attached...

Week 1 & 2 - PCB Layouts
Log from 25in24 Electronics Project Board
I've started by laying out the five boards in Eagle 9.52. Boards are now being ordered through JLC. All parts have been ordered through Mouser and Digikey - however sourcing a small meter and solar panel that will match have been a bit of...

Week 3 - PCBs in, soldering and assembly
Log from 25in24 Electronics Project Board
PCBs came in! Thanks JLCPCB!!Soldered up the boards - Kino in the Design Lab Laser cut a cool outline in plywood that I'm using for the base for testing.Boards were soldered and mounted. There were some clearance issues with the meter...

Week 3 part 2 - testing
Log from 25in24 Electronics Project Board
Well, initial testing was more difficult than expected - took about five hours just to get a couple of basic circuits working. Made a number of incorrect assumptions / mistakes including:Assuming it might be differences between components (germanium...

Rev1 Display Bodge
Log from Multimeter
To make the display work on revision 1, I bypassed the display driver and wired the pico IO pins strait to the segment LEDs. It is a little faint, as the display driver circuit worked completely differently, but it works to test the display.

Frankenscope
Log from Low-Cost Microscope Boom
There's not much to this build: Mount the monitor arms to your bench. Follow the manufacturer's instructions, or wing it like I did. I figured out where I wanted the scope to end up when in use and marked the location on my bench. Used a 1.5" hole...

Prerequisites and software
Log from VGA videocard for microcontrollers
Sometimes, when making your own devices on microcontrollers, there is a need to display huge amounts of information on a display and to use a bigger screen for ease of perception. Unfortunately, there are no ready-made and budget-friendly solutions for...

|<
<
3502
3503
3504
3505
3506
>
>|