6141 Results for "3D printing"

Testing the PCB (with 3D prints)
Log from Reviving the TI-92 calculator into a RPI PC
Today, we are testing to see it the designed PCB fits into the TI casing. For this , we make a 3D printing of the board.

3D printing for PCB design
Log from SLoRa - Wireless weather station for agriculture
Designing the sensor board took me more time than expected which in combination with surprisingly fast delivery of temperature/humidity case with protective shell meant that the case arrived before I sent the boards to production.A rainy Saturday was...

CAD development and 3D printing
Log from Minder
Once the final design was established I began to develop the 3D model using Solidworks.Isometric drawing:3D viewI also created/downloaded the circuit components and ensured that they fitted into the watch:Once everything looked good it was time to print!**Note:...

3D printed shell
Log from NuROV
3d printing the OpenROV design is definitely sturdy enough to use. This is a starting point as the whole thing has to be redrawn, but I end up with spare parts for the ROV that I have.Now the hard part, seeing if there is any way to print pressure...

3. 3D Printing
Log from JAWC - Just another Wordclock
As i don't own some sort of cutter i just went with 3D Printing. I will probably add the Letters to Thingieverse so you can do that (PITA) to yourself :-DSince i wanted to have the Clock like half a meter wide each Letterbox has a outer dimension of...

3D Printing
Log from DSKY
3D Printing: Having never owned a 3D printer, I purchased a printer and started taking my modeling abilities to the next level. After learning a few important lessons in 3D printing (mistakes), I was up and running. It takes a day or more...

3D printing version 1 today
Log from Lily Power Pods, TEG + Concentrated Solar
in 7 hours I will have the main pieces printed. I will need to determine scale and go from there. If I like how it looks I will print at least two more sets of petals.

3D Printer
Log from Open Source Underwater Distributed Sensor Network
I haven't updated in awhile. I got a new job this summer working for a startup, and moved cross country to Florida. That soaked up most of my time, but I have made some progress on the project. Given my limited time, I made a big mistake with how I...

3D printed prototype
Log from 3D Printed Parametric Motor
Finally, I got around printing the first motor prototype. The frame is here, I still need to find the coil, a 5mm shaft, screws and possibly bearings. I have some small magnets that should do it for the proof of concept.The stator coil holders were printed...

3D printed helmet
Log from Robô da Alegria ("Joy Robot")
The head of the robot was designed in Fusion 360. It's composed of 6 parts, which were printed in white PLA with 0.2mm resolution. Total printing time: 14 hours.A cabeça do robô foi projetada usando o Fusion 360. Ela é composta de 6 partes,...

3D Printing wheel arches
Log from Ardumower Arctic Hare X2
Small update:wheel arches fresh from the printer! All parts is completely untouched and no after finishing.Starting to look good!

Finished 3D Printing New Enclosure
Log from HeadsUp, a Low-Cost Device to Diagnose Concussions
It took around 28 hours, but we finally finished printing the parts on our school's Makerbot! Here are the parts right after we took them off of the printer:After removing rafts and support material, we discovered a minor problem: we had put tape over...

volumetric 3D printing
Log from prism laser scanner
As described on Hackaday and Sci-hub, a new volumetric printing method has been described which uses two colors.A light sheet with a 375 nm laser diode and DLP projection between 450-700 nm. The prism scanner can also be used to accomplish this. Basically,...

3D Printed Lancing Tools
Log from Hospital + Makerspace Initiative
August 8, 2017 | ProgressTH Lancing tools are used for breaking open blisters and sores, and in this case, breaking only one to take a sample for diagnosis. We don't really think that 3D printing is good for this application, but the national children's...

1st 3D Printed Prototypes
Log from Electromechanical Refreshable Braille Module
Hey there, Hackaday community! I wanted to share an exciting update on my ongoing project focused on 3D printing small Braille parts. Today, I want to discuss the significance of resolution when it comes to creating high-quality Braille tactile components....

|<
<
2
3
4
5
6
>
>|