52581 Results for "《 예약문의 OIO↗8489↗8306》선릉가라오케や가라오케추천received가라오케가라오케가라오케사이즈scarcely 청담가라오케иª가라오케사이즈glowing"

The New Model
Log from Open Indirect Ophthalmoscope
The design models have been 3D printed and assembled. We made two devices, only the outer casings are different in the two models. One is printed on a SLS 3d printer (Nylon PA-12) and another one with an FDM 3D printer (PLA Black).Both the models are...

A, S, C - these are instructions...
Log from TMS9900 compatible CPU core in VHDL
I've added a whole bunch of new functionality into the CPU core:All branch instructions. I had just JMP in the past, now I have:JLTJLEJEQ (tested)JHEJGTJNE (tested)JNC (tested - need rechecking)JOC (tested - need rechecking)JNOJLJHJOPNow the ALU supports...

Lower Frame Completed, Upper and Lower Halves Joined
Log from Goliath - A Gas Powered Quadcopter
This last weekend was productive and the major portions of the frame are now complete. After attaching the engine mounting plate to the frame, the next step was assembling the lower frame. The lower frame is similar to the lower ring of the upper frame,...

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

NeuroBytes v0.92 Prototype
Log from NeuroBytes
Today, the NeuroBytes project takes its first baby step into the 21st century.Okay, ignore the extremely sketchy construction techniques. It's an STM32F0 Discovery board, chosen due to its extremely low cost (under $10) and built-in ST-LINK programmer....

FLED
Log from FLED
So we had an idle Friday afternoon here at SupplyFrame HQ and our evil overlord Alek asked us to build something cool for the office.With the restriction of only having a day to build we didn't have many choices in what we could source components for,...

Securing the LEDs
Log from FLED
Now that we had most of the LEDs it was time to start fixing them to the backboard.First off we hot glued all the LEDs into place on the backboard which was a sheet of plywood. This took a little while but John P, Tom M, and Albert all pitched in and...

Making the frame
Log from FLED
Now we wanted this display to look really sweet since it will be on our office wall for some time to come. To make it look gorgeous we decided to make the frame out of white foamed PVC board, and the front diffuser out of 1/4" thick white acrylic.First...

Adding the electronics
Log from FLED
To drive this system we decided to use a Raspberry Pi and Arduino Micro combination.The Raspberry Pi runs a stack of Nginx, Memcached and NodeJS which then feeds desired LED colors to the Arduino Micro which streams them out over the WS2811 protocol...

A working display!
Log from FLED
Finally Ivan screwed the backboard into place. One of the great things about using Foamed PVC is you can basically treat it like wood, it holds a screw well and is easy to cut and saw.With our fingers crossed we switched it on, and to our delight we...

Software stack
Log from FLED
The display is looking great, but we really need to make this into more than just a pretty rainbow colored matrix.To do this we decided we wanted to be able to open up the control of the lights to all our developers, and we want to be able to feed data...

Oh No! *Pop*
Log from FLED
So just after presidents day we came back into the office and found that the FLED was dead! Turned it on and nothing happened. After eliminating the ATX PSU from the equation it became clear we would need to pull the display down and open it up to find...

A new start....
Log from FLED
So the LEDs have died again. Typical really, we fixed them up just two days ago replacing another blown unit, but it once again died. These really have been the worst LEDs I have ever encountered, bright and cheap, but completely unreliable.Therefore...

Success!
Log from FLED
After much soldering....and a little debugging we managed to get the array lit up.If you look carefully you can see the grounding braid we used as a power and ground bus at either end of the strips. We then simply hooked up data and clock (these are...

1
2
3
4
5
>
>|