489 Results for "%s"

Finding metric hardware in the U S of A
Log from Astrophotography Camera Mount
I design all my projects to metric dimensions. That's fine for straight up 3D printed parts like brackets and game board pieces but sometimes it makes finding fastening hardware difficult. The local "small" hardware stores - Ace and True Value - all...

Updating the Stack Manipulation
Log from SIMPL
Inspired by Sandor Schneider's "STABLE" project I decided that it was time to update the code that handles the stack manipulations, particularly important for arithmetic, logical and comparison operations.I found that a 4 level stack based on registers...

Hover Boi
Log from Custom motor driver for FFB Wheels
Here's an frankenstein hoverboard build. Main obstacle in post before was that it's mount was not good enough. Ordered SK16 smooth rod holder and it's freaking great! This mount is way stronger than just taking a clamp directly on motor, like big...

Another run, some good and some bad.
Log from OpenESpin
First, take a look at the photo below, before you watch this short video.The photo shows what seems like one big fiber. But you see all those small fibers hanging off it's sides? Turns out that large fiber is just a collection of tiny ones. This happens...

The Concept
Log from "The Deep" - D.C.'s Sonic Jellyfish Art Car
So, after several incarnations, we settled on this concept of the Deep.... as opposed to the original concept, which was this:... due to the conditions of Black Rock Desert. Wind powered vehicles are banned from Burning Man because of a bunch of incidents...

Made the structure for the dancing petals!
Log from Formapale Edest
Good progress has been made on the plant's structure and its "dancing" petals! Here's how Natalie did it. Start by drilling a hole in the side of a dowel so that your metal rod can fit though.Then you want to spin the rod around in a circle and glue...

Motion Detection
Log from Liemoth
Working on a motion detection option within AHDKWas going to use it to try and record some raccoons. On second thought, it's probably better for bird watching or photographing lightning.

Handles
Log from How to use an aerial 36 inches lens
They've been lying around the bench for a while but I was sure to have to take them apart from the thing a few times, so I've waited until complete achievement of the work.It's for sure some furniture stuff made in UK or USA as the distance between the...

It's Gluebricant!
Log from IBM Selectric III Restoration Project
The simple and obvious problems I mentioned before are nothing compared to the fact that this typewriter has been standing for years with no proper maintenance and oiling... Same problem as I once had repairing a vintage record player - the grease became...

Introducing RepRap-XY Iteration 2
Log from RepRap-XY Iteration 2
RepRap-XY Iteration 2 is a fork of the RepRap-XY printer designed by Jand on the RepRap forums, his design is a 3D printable adaption of Zelogik's machined aluminum CoreXY 3D printer. RepRap-XY is essentially a RepRappable version of Zelogik's printer,...

Gathering Materials and Realising I'm a Fool
Log from The Robot with Balls Experiment
Yesterday found a nice plastic pipe with different diameter on each size: The idea was to cut 2 rings, one from each side of the pipe, then put the rings one inside the other, in order to make a gimbal type articulation, and glue the motor in the gimbal...

Aussie Sawppy - Hex Drive
Log from Aussie Sawppy
OK. So COVID-19 has obviously crashed any significant outdoor fun for a while now. We had plans for Sawppy excursions to interesting terrain that were victims of Western Australia's sudden inter-regional travel restrictions. Such is life... So, the rover...

Gimbal Live Test 2
Log from Project Rockoon
After talking to some people, including Arsenio (from Hackaday) Joe (who's working on the Scout rocket), Mike (from Hackaday), and friends Owen, Adam, Erica, and Evie, I've designed a list of tests in increasing difficulty for the gimbal.1. Pivot point...

Things that don't work
Log from FPV for Mavic Pro
I'm an iPhone user, so the phone i use with the Mavic's controller is an iPhone 6. The controller plugs into the lightning connector on the bottom and appears, I assume, as a USB device to the phone.My original idea to get HDMI out was to use Apple's...

Hotend testing framework
Log from Multi-Material Hotend
With the AnyCubic's Kossel assembled, I'm replacing the standard hotend assembly with a 3d printed carrier designed to accept the high-temp resin hotend. You can see the frame here: The hotend will slot into place and be secure with the fan bolts. I...

1
2
3
4
5
>
>|