171 Results for "Q%20%ED%85%8D%EC%82%AC%EC%8A%A4%ED%99%80%EB%8D%A49%20cddc7_com%20%E2%98%8F%ED%94%84%EB%A1%9C%EB%AA%A8%EC%85%98%EC%BD%94%EB%93%9C%20B77%E2%98%8F%EC%98%81%EB%8D%95%201xbet%E2%85%95%EB%B6%81%EC%A4%91%EB%AF%B8%EA%B3%A8%EB%93%9C%EC%BB%B5%E0%AC%B9%EC%95%84%EC%8B%9C%EC%95%84%EC%B6%95%EA%B5%AC%E1%BB%86%EB%B9%85%EC%B9%B4%EC%A7%80%EB%85%B82%C6%9B%ED%85%8D%EC%82%AC%EC%8A%A4%ED%99%80%EB%8D%A49%EB%A6%AC%EB%B7%B0%20indianocean/"
This Blog is about making a nutrient dosing system for hydroponics that is plug and play, I didnt quite get it to the full stage of plug and play with this version. But it is almost there. Because the change of nutrient strength of our systems can be...
Genesis V0.5 exhibits the following changes from Genesis V4The Tracks cable carrier is repositioned and now supported with teenuts and long M5 screws, just like on the GantryThe Z-axis motor mounting bracket has been made thicker and the holes for the...
Here's a progress update of what's happened in the past 2 days. Face flattened and holes tapped The technician sounded impressed by the aluminium 3D print, but could visibly see that one side of the supposed-to-be-8mm section was shorter than the other...
All parts printed and ready for a test tonight! Some parts are in need of minor changes such as; hex nut pocket hole width, bolt head pocket depth, and other minor things to make assembly easier. Photos updated as well. Once i get some photos from the...
Or 9 in 1 out if the centre is used. I know it looks complicated, but it's not complicated. Modelling So, as I've read other engineers do, I wanted to see how far I could push the concept. The Palette 3 Pro had more inputs than the Palette 2 and...
There are designs on the net for this, but they all seem based on a design with a fundamental error. They asynchronously reset the 8-bit counter when it reaches 207. This means it cycles through states 0 to 206, then very briefly becomes state...
Sunday, 20/08/2023, 15:02 There is no way I wil be able to finish this project log in a single day or even a single week, so I will just post this here, so if someone wonders "is this project still being actively worked on?" then, they will know...
(Original post date: 06/03/16)Even though I ended up constructing a brand new front panel for the toy piano for this project, the rest of the enclosure of the vintage toy synth will be using the existing piano enclosure. Apart from the front...
Thursday, 27/07/2023, 10:48. Well, I will just post this here, but I will keep editing later (I can barely edit anymore because I already wrote so much stuff). Just because It would be of great help if someone were to give suggestions....
Development on the V9958 board continues apace, and after a false start due to a silly mistake in the first revision things are back on-track with a revision 1 prototype. The design is now validated and working really well. So far it's baby-steps in...
The Audio InterfaceConnecting the microprocessor (uP) to an 8 ohm speaker and to an 8 ohm speaker used as a microphone is tricky. Tricky if you want it clean (no PWM in the out put) and simple (i.e. low part count and garden variety components).Op AmpsThe...
Most of the headache seems to be installing an OS. This is easy with a ready-to-go PC with a CD ROM or even floppy disks, but my Futro board did not have them. I decided to buy a small PC with Windows 98 already installed. There were some for £102,...
In order to connect our 1/16" tubing to the 365um OD capillary tube used for the separation process, we decided to 3D print a flow block rather than buying the ~$100s commercial units available.Each block serves as a connecting point to the capillary...
Specifications:Processor Broadcom BCM2387 chipset. 1.2GHz Quad-Core ARM Cortex-A53 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)GPU Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated...
(this project log is looking like a schizophrenic conversation with myself, bruh) Project Log 52: 3D modelling Attempt 7. (I'm previously writting this on a notepad because I'm testing if not creating a project log helps my anxiety. It is ironic...