914 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㎰ 쓰리아워fearful쓰리아워레깅스룸쓰리아워강남술집정보constructed 쓰리아워가격ペゴ쓰리아워wealthy"

MORE RADII!!
Log from Hubsan X4 Replacement Frame
I haven't putzed about with the v0.1 base at all, but I think I've got a motor mount design that I like. It's got the split bolt setup for securing the motor (including a cutout for holding a 2-56 nut), and the legs are cool lofted dealies. Lots of radii...

CylinDraw Can Draw on Paper!
Log from CylinDraw: Rotary Plotter & Engraver
Announcing a major new capability: CylinDraw makes for an excellent paper plotter! The hardware needed to enable this capability only requires the addition of a large tube to wrap the paper around and two rubber bands to secure the paper in place....

Hack Chat Transcript, Part 1
Log from Amateur Rocketry Hack Chat
Dan Maloney10:27 AMHi @Kip Daugirdas! Welcome aboard! mark joined the room.10:52 AM bsigler joined the room.11:24 AM Alex Mi joined the room.11:31 AM Alex Mi11:32 AMmy question :) - how people decide between liquid fuel and solid fuel...

HACKLET 17 – KEYBOARDS
Log from Hackaday.io Project
This week on The Hacklet we're featuring some of the best keyboard hacks from Hackaday.io!Hackers are really into their keyboards. Everyone has a favorite, and those favorites vary wildly. Mechanical, soft touch, ergonomic, QWERTY, DVORAK, chorded, you...

HACKLET 21 – HALLOWEEN HACKS PART 2
Log from Hackaday.io Project
We asked, you listened! Last weeks Hacklet ended with a call for more Halloween themed projects on Hackaday.io. Some great hackers uploaded awesome projects, and this week's Hacklet is all about featuring them. Every one of our featured projects was...

HACKLET 70 – CALCULATOR PROJECTS
Log from Hackaday.io Project
Hackers, makers, and engineers have long had a love affair with number crunching. Specifically with the machines that make crunching numbers easier. Today it may be computers, smart watches, and smartphones, but that wasn’t always the case. In the 50’s...

HACKLET 108 – SIMPLE FUNCTIONAL 3D PRINTS
Log from Hackaday.io Project
We featured 3D printer projects on last week’s Hacklet. This week, we’re looking at a few awesome projects created with those printers. Trying to pick great 3D printed projects on Hackaday.io is a bit like staring at the sun. There are just way too many...

HACKLET 110 – OPTICAL MICROSCOPY PROJECTS
Log from Hackaday.io Project
Humans have always wanted to make small things bigger. To see that which is unseen with the naked eye. The inventor of the original microscope happened sometime in the 1600’s, though the inventor is still contested. Some say it was Cornelis Drebbel,...

Turbo on the small system
Log from Vacuum System for Deposition
On the smaller system I picked up a 1000l/s Pfeiffer turbo to put on it as well. It had a bad bearing and I picked up another one and installed it. Oil was a pain to come across, very specific for the pump, a fomblin. The biggest issue was mounting...

Additional Equipment and Sample Pictures
Log from Project Photobooth
I tend to have very shaky hands, especially when attempting to take photos, so in addition to building a small booth, I also purchased a tripod (10$) and a macro lens ($15) for my phone. The tripod has a couple of features I really like. For one,...

Pop Can Claw Anatomy
Log from Anatomy of a Claw
The Pop Can Claw is now finished and picking up pop cans. It is not capable of picking up the large cans (they are too heavy for the current design). Instead it can pick up the short 8 FL OZ or narrow 7.5 FL OZ cans. The design uses the extended fingers...

Gateway 1.7. pre-order
Log from Home security
Gateway PCB is in fabrication, and I'm hoping for the best that there will be no errors on PCB. It will have following parameters:MCU ATmega1284P, 16KB RAM, 128KB Flash.8 analogue inputs for balanced PIR sensors.4 digital inputs for simple sensors, like...

Yet another keyboard
Log from MiniBSD laptop computer
Though the old Tesla keybaord I described here and here and described by @Benchoff in #Metal Dome Keyboard is still in my drawer in amount higher than small, I'm looking for alternatives for my MiniBSD. I found one in here, for the case the listing is...

Measure twice, cut once.
Log from Starfleet Communicator Badge
Working on the badge dimensions, I took a digital caliper and measured a few bits on the earpiece. It's roughly 46.51 x 16.09 mm and shaped like a surfboard. The narrow end is about 5.14mm tall while the other is about 12.38mm. The microphone is encased...

Bad Planning and Fails
Log from Ma'Tok Staff
Had hundreds of problems. So many that I dismantled the entire thing and gave up. After some inspiration from [kmancreeper412] and my mom, I took the parts I had and started over. Also the propellant cannon fired a few homemade foam rubber darts,...

1
2
3
4
5
>
>|