35398 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워ㅾ Йlife강남술집정보ħ쓰리아워레깅스룸강남쓰리아워７┢강남술집정보indignation 쓰리아워레깅스룸ケ쓰리아워ı㎃outside"

Fan controller - part II
Log from Greenhouse Pi
Today i soldered together the fan controller as sketched in the last log entry:To mount the fan i bought my self a 100mm wall mount for air ventilationand attached the fan to it. To seal it off i used some silican to keep the air outside when the fan...

Putting the prototype in a case.
Log from Long zero, LiTZ wilderness protocol
I was finally able to get this into a non protoype form. I change the code a little to make it more usable. Contruction techniques for the final version was a mix of wire wrapping and some small guage wire soldering. I replaced the relay module I use...

They didn't die
Log from Herbot
Quick update. The current experiment is Separating out the roots more when transferring from the seedling container and leaving a bit of soil on to help retain moisture (I still think that root development during the seedling stage in the misting chamber...

Frame Order
Log from Bullet Movies
Just a random thought - maybe I should switch the RGB flash order to have the least-ghosting colors first. Since the ghost-correction algorithm is never going to be perfect, you'll always be able to detect at least some subtle ghosting. In looking at...

Bouncing off the walls
Log from Cardware
Mapping is the next big push, mathematically speaking. Luckily I have a head-start on that, I had begun working on it with the original AIME, and have some scrappy code snippets I found randomly on the 'net. I dont know who authored this piece of logic,...

How To Build
Log from Cyclone Dust Collector
As luck would have it I found a suitably sturdy bucket & lid in a dumpster outside a Chinese restaurant and two 1 meter pieces of PVC pipe of exactly the right diameter in another dumpster. The MDF was sourced some time ago from the waste bin of a local...

Other things we can do with this
Log from Atmosphere Powered BLE Light Tie
So I have been thinking more about what I could use this project for. I have already created a lanyard version of the led strips as well. Some other thoughts I have is maybe trying to add an RTC component where you can have it brighten up at certain...

Battery expansion
Log from Resin-in-resin
Some people have brought up very valid concerns about battery expansion in this project. I'm working with some ideas on how to easily add an external battery rather than keeping it inside the block of epoxy, so I'd suggest doing something similar if...

Efficiency
Log from Open MPPT
After having been testing the initial unit's performance for the past few days on and off, I have found a few notes to efficiency.Using 19V input to provide 3S(12.3V)@4A output, the unit achieves extremely good ~95% efficiency of power out/power in....

2/5/18 Update
Log from BioBird
Since we received our Bionic Bird, we have been testing out the flight inside the robotics lab and outside. We practiced using the bionic bird app that came with the drone to control the bird's flight, from going up and down to making sharp turns. After...

3D Printed Case
Log from Gecko Node - Wireless Low Power Sensor
Even though the Gecko Node does not have to be water proof, it will be used outside. Because of this the PCB needs some kind of protection. I decided to make a simple 3d printed case in Fusion360.This is what I came up with. It's the smallest shape to...

11.05.11 - another week of data
Log from µPower (beehive) SD logger
The last week was like early summer in Germany. Temperatures reached 30°C in some parts (86 degree freedom):Log-Data for last week:In these warmer days they have more "trouble" keeping a constant temperature but they try their best. When the outside...

Indoor Tomato Outperforming The Outdoors
Log from MoAgriS: Modular Agriculture System
My experiment started a few weeks ago to see how the growth of a tomato from the same pack of seeds would compare by being grown indoors with MoAgriS vs. being grown outdoors in the sun. The difference is quite staggering. Even though I live in a very...

Testing Plastidip on Sensors , Posted at 12/10/2017 6:44:54 PM
Log from Watchdog Security Camera Robot
I tried out the plastidip on the body and so far it looks pretty cool and if I want to repaint or change colors it is certainly easier than sanding! In this pic i also fitted some sensors in front of the wheels as non touch bump sensors. Also there...

Rovio 2.0 Riser/Spacer Progress test platform
Log from Invisible QR Code Navigation for Robots 2020
After two coats of Tite Bond glue which is also generally known as PVA plastic, you can see the wood has absorbed the PVA and also left a candy shell, with a light sand this is a paintable plastic finish. Next I need to decide where I want sensors or...

|<
<
5
6
7
8
9
>
>|