Close

5166 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남레깅스룸ⓨ강남레깅스룸singing강남레깅스강남레깅스룸강남레깅스룸remainder 강남레깅스㉮┢선릉레깅스agitation"

  • Syntax and semantics
  • Log     from One kilobyte Tiny BASIC for the 8080
  • The following statements are supported: PRINT LET = IF GOTO GOSUB RETURNINPUT FOR = TO [STEP ]NEXTEND and additionally, these commands can be issued if not prefixed by a line number: LISTRUNNEW is a letter A-Z. A single array called @ is supported, its...

  • Expression evaluation

  • Log     from One kilobyte Tiny BASIC for the 8080
  • When I first wrote the expression evaluator I used Dijkstra’s shunting yard algorithm for handling operator precedence and bracketed subexpressions. I changed approach later on when writing code for the RND, USR and ABS functions because I realised the...

  • The array @
  • Log     from One kilobyte Tiny BASIC for the 8080
  • There is a single array @, and it starts at the first byte of free memory after the parse area. The ^ variable stores the address of the start of the array. If I input LANDER.BAS (the classic LUNAR LANDER game) then PRINT ^ gives 1502. This means...

  • SquareLine Design
  • Log     from Cartoon Digital Clock With Switchable Style
  • Create a new product Choose the Arduino and enter in parameters. According to the features of MaTouch_ESP32-S3 Round SPI TFT with Touch 1.28", the resolution is 240*240, the shape is a circle, and the color depth is 16-bit. Design the screen Add the...

  • Firmware
  • Log     from Cartoon Digital Clock With Switchable Style
  • Define the resolution of the screen.static const uint16_t screenWidth = 240; static const uint16_t screenHeight = 240; Then set the drive pin , the TFT_BLK , and touch pins according to the schematic diagram.#define TFT_BLK 7 #define TFT_RES 11 #define...

  • System overview
  • Log     from EasyLink DIN PCB
  • System is design in modular way. Each module is mounted on DIN rail and connected one to the other with terminal block. First module contains ESP32 which is "CPU" of the whole block. Each next module is consuming GPIO from previous and shifting "free"...

  • First version of prototype PCB ordered
  • Log     from EasyLink DIN PCB
  • I am exited to share that PCB for first three modules are right now under production by PCBWay.   ESP Board First module is simple ESP32 board that can take 32 pind ESPDevboard like that: and expose 16 GPIO pins as well as I2C line through...

  • Hack Chat Transcript
  • Log     from Biomedical Engineering
  • Dan Maloney  3:00 PM OK, welcome everyone, let's get started. I'm Dan, I'll be modding today along with Dusan as we welcome Nyeli Kratz to the Hack Chat. Today we're talking about biomedical engineering. Walter Lite  3:00 PM hi dan Dusan Petrovic  3:01...

  • Ultra low cost microcontrollers
  • Log     from 1 dollar TinyML
  • If the complete BOM for sensor is to be under 1 USD, the microcontroller needs to be way below this. Preferably below 25% in order to leave budget for sensors, power and communication. Thankfully, there have been a lot of improvements in this area over...

  • Audio input for 20 cents USD
  • Log     from 1 dollar TinyML
  • TLDR: Using analog MEMS microphone with an analog opamp amplifier, it is possible to add audio processing to our sensor.The added BOM cost for audio input is estimated to be 20 cents USD.A two-stage amplifier with software selectable high/low gain is...

  • Supplies
  • Log     from Sound-activated Counting Light
  • In this demo, a sound module, a WS2812 module, and a MaESP ESP32 OLED are needed, and they all ccan find in MaESP dev kit. Sound module Sound module is the most sensitive to the environment sound intensity, commonly used to detect the intensity of the...

  • Step 2: Software
  • Log     from Sound-activated Counting Light
  • At first, we need to prepare the environment for ESP32 development board programming in arduino, and you can cheak this guide.secondly，Install the libraries and files which will be used This is a library for our Monochrome OLEDs based on...

  • Project journal
  • Log     from STEbus Z180 slave board (SP180)
  • 2024-01-20 I've just found and bought this board from eBay. Made by DSP Design Ltd. It uses the 7-thou pitch DIL packaged device (ugh!) which can only access half the memory of the PLCC68 version. I don't expect this to come with a manual or circuit...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday