I've been testing the deep sleep mode on the ESP-03. I loaded the frankenstein firmware from here https://github.com/nekromant/esp8266-frankenstein onto the module to test the deep sleep mode.Note, you need to tie gpio15 to GND in order to boot any firmware...
So since the Teensy++ 2.0 bootloader is not available and I'm not feeling comfortable to learn all the bells and whistles of USB communications I was looking for other options. Googling "at90usb1287 arduino" I found this https://github.com/mattairtech/ArduinoCore-avr...
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...
With the compass functionality tested on a breadboard, the next step is to transfer it to a universal prototyping board, adding a status display and IO expansion ports to drive a LED ring that simulates the horizon. For the board, I am going to use the...
Let's go back to logs 139. Heuristic breakthrough and 140. gPEAC to 1 million. Now that the gPEAC inner loop is optimised, it's time to build the distributed scanner to hack through a mountain of numbers... It should be faster with the optimised...
OK I thought that the amount of data in the future would be too large and I decided to do the sieving in C. Using the available scanning data, I could only go up to 2161 : n1=46 and n2=2114.The first hicup comes at 1511 so there is no point in dealing...
With the new harvest, I estimate that the perfect and maximal orbits under m=1M is around 100K. This starts to make quite a large .h file to include in the sieve generator. Not that it's such a concern but scalability, you know.... And embedding such...
This is an overview of the layout in which KGE works. Get User String (Round 0)Split String Into PairsIf Not Enough Then Add Specially Made Character Which Is Deleted During DecryptionUse Byte SubstitutionSwitch User Strings To IDs and Find Replacement...
Instruction Set Shuffle Having ADD and SUB in different op code pages seems wrong, as SUB (ACC = Value - 1) can be coded as: LOAD ValueXOR FADD 1XOR F Yes, the carry flag works. The current op code set would be: LOAD ValuePAGE 8SUB 1PAGE 0 No saving!...
Well, finally I was let down by a lack of amps, the batteries I have just arent strong enough to move the limbs without at least doubling them. And I'll need to upgrade the regulators. Such is life...I added a little bit of code to the Pi's monitor....
With the wiring complete I wrote a small program in Python to test the lights, buttons, and switches on the front panel. To be clear this is NOT the KENBAK-2/5 emulator running a program (yet). As it turns out I did have to replace one of the LEDs...
July was a tough month, and August is no different. Due to some components arriving late, I've only been able to start my work on the Hackaday.io project with considerable delay. So I had to catch up with everything and squeeze the entire development...
Back to the workshop for the revenge of the return of the son of the Vintage Ring Oscillator ! This time with a new ally : the ceramic capacitor ! TL;DR : it's 60% faster ! But the V/F curve might look different from @Tim 's experiments... As usual,...
The amazon fairy dropped off a "NES Classic Controller" and a "Classic Pro"The classic pro comes up as a classic controller, The only difference is the analog R and L on the one I have are buttons and just return the max value when pushed. Although this...
Microscope slides, 3-D printed parts and the finished test-tube-shaped micro reaction chamber. 2-component 5-minutes epoxy resin adhesive has been used to glue the microscope slides and nipples in place:Leakage test (pass):Populated PCB:Reaction chamber...